lkml.org 
[lkml]   [2014]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v2 00/13] ARM: OMAP: SATA support for OMAP5 & DRA7
    Date
    Hi,

    This series adds SATA support for OMAP5 uevm and DRA7-evm boards.

    - Cleans up the ti-pipe3 PHY driver
    - Adds SATA DPLL support to ti-pipe3 PHY driver
    - Adds SATA nodes to hwmod and SoC DT data

    Patches are based on 3.14-rc4 with balbi/next, linux-phy/next and
    omap-for-v3.15/dt merged on top..

    To test SATA you will also need [1].

    [1] - http://article.gmane.org/gmane.comp.hardware.netbook.arm.sunxi/7285

    Changelog:

    v2
    - use 'depends on' instead of 'select' OCP2SCP bus driver.
    - Changed DT bindings for dra7-usb2 and am437-usb2 phy.

    cheers,
    -roger

    ---
    Balaji T K (2):
    ARM: dts: omap5: add sata node
    ARM: dts: dra7: add OCP2SCP3 and SATA nodes

    Keshava Munegowda (1):
    ARM: OMAP5: hwmod: Add ocp2scp3 and sata hwmods

    Kishon Vijay Abraham I (1):
    phy: rename struct omap_control_usb to struct omap_control_phy

    Nikhil Devshatwar (1):
    ARM: DRA7: hwmod: Add ocp2scp3 and sata hwmods

    Roger Quadros (8):
    phy: omap-control: Update DT binding information
    phy: omap-control: update dra7 and am437 usb2 bindings
    phy: ti-pipe3: cleanup clock handling
    phy: ti-pipe3: Add SATA DPLL support
    phy: ti-pipe3: Don't get 'wkupclk' and 'refclk' for SATA PHY
    phy: ti-pipe3: streamline PHY operations
    phy: ti-pipe3: Fix suspend/resume and module reload
    phy: omap: Depend on OMAP_OCP2SCP bus driver

    Documentation/devicetree/bindings/phy/ti-phy.txt | 40 ++-
    Documentation/devicetree/bindings/usb/omap-usb.txt | 24 --
    arch/arm/boot/dts/dra7.dtsi | 39 +++
    arch/arm/boot/dts/omap5.dtsi | 47 ++-
    arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 73 +++++
    arch/arm/mach-omap2/omap_hwmod_7xx_data.c | 31 +-
    drivers/phy/Kconfig | 16 +-
    drivers/phy/Makefile | 1 +
    drivers/phy/phy-omap-control.c | 320 +++++++++++++++++++++
    drivers/phy/phy-omap-usb2.c | 8 +-
    drivers/phy/phy-ti-pipe3.c | 269 ++++++++++-------
    drivers/usb/musb/omap2430.c | 2 +-
    drivers/usb/phy/Kconfig | 10 -
    drivers/usb/phy/Makefile | 1 -
    drivers/usb/phy/phy-omap-control.c | 319 --------------------
    include/linux/phy/omap_control_phy.h | 89 ++++++
    include/linux/usb/omap_control_usb.h | 89 ------
    17 files changed, 815 insertions(+), 563 deletions(-)
    create mode 100644 drivers/phy/phy-omap-control.c
    delete mode 100644 drivers/usb/phy/phy-omap-control.c
    create mode 100644 include/linux/phy/omap_control_phy.h
    delete mode 100644 include/linux/usb/omap_control_usb.h

    --
    1.8.3.2



    \
     
     \ /
      Last update: 2014-03-06 16:01    [W:6.299 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site