lkml.org 
[lkml]   [2014]   [Mar]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/3] phy: omap-usb2: Adapt phy-omap-usb2 for AM437x
On 3/6/2014 4:43 PM, Kishon Vijay Abraham I wrote:
> George,
>
> On Monday 03 March 2014 03:40 PM, George Cherian wrote:
>> Adapt phy-omap-usb2 driver for AM437x.
>> - Add new comaptible "ti,am437x-usb2" for AM437x
>> - Pass proper data to differentiate AM437x and others.
>> - AM437x doesnot support set_vbus and start_srp.
>> - Also update the Documentation to add new compatible.
>>
>> Signed-off-by: George Cherian <george.cherian@ti.com>
>> ---
>> Documentation/devicetree/bindings/usb/usb-phy.txt | 4 +-
>> drivers/phy/phy-omap-usb2.c | 49
>> +++++++++++++++++------
>> include/linux/usb/omap_usb.h | 9 +++++
>> 3 files changed, 49 insertions(+), 13 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt
>> b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> index c0245c8..b3fa409 100644
>> --- a/Documentation/devicetree/bindings/usb/usb-phy.txt
>> +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt
>> @@ -3,7 +3,9 @@ USB PHY
>> OMAP USB2 PHY
>>
>> Required properties:
>> - - compatible: Should be "ti,omap-usb2"
>> + - compatible: Should be either of
>> + * "ti,omap-usb2" for OMAP4, OMAP5, DRA7
>> + * "ti,am437x-usb2" for AM437x
>> - reg : Address and length of the register set for the device.
>> - #phy-cells: determine the number of cells that should be given
>> in the
>> phandle while referencing this phy.
>> diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c
>> index 7699752..d54f24b 100644
>> --- a/drivers/phy/phy-omap-usb2.c
>> +++ b/drivers/phy/phy-omap-usb2.c
>> @@ -144,6 +144,31 @@ static struct phy_ops ops = {
>> .owner = THIS_MODULE,
>> };
>>
>> +#ifdef CONFIG_OF
>> +static const struct usb_phy_data omap_usb2_data = {
>> + .label = "omap_usb2",
>> + .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS,
>> +};
>> +
>> +static const struct usb_phy_data am437x_usb2_data = {
>> + .label = "am437x_usb2",
>> + .flags = 0,
>> +};
>> +
>> +static const struct of_device_id omap_usb2_id_table[] = {
>> + {
>> + .compatible = "ti,omap-usb2",
>> + .data = &omap_usb2_data,
>> + },
>> + {
>> + .compatible = "ti,am437x-usb2",
>> + .data = &am437x_usb2_data,
>> + },
>> + {},
>> +};
>> +MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
>> +#endif
>> +
>> static int omap_usb2_probe(struct platform_device *pdev)
>> {
>> struct omap_usb *phy;
>> @@ -153,10 +178,16 @@ static int omap_usb2_probe(struct
>> platform_device *pdev)
>> struct device_node *node = pdev->dev.of_node;
>> struct device_node *control_node;
>> struct platform_device *control_pdev;
>> + const struct of_device_id *of_id;
>> + struct usb_phy_data *phy_data;
>> +
>> + of_id = of_match_device(of_match_ptr(omap_usb2_id_table),
>> &pdev->dev);
>>
>> - if (!node)
>> + if (!of_id)
>> return -EINVAL;
>>
>> + phy_data = (struct usb_phy_data *)of_id->data;
>> +
>> phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL);
>> if (!phy) {
>> dev_err(&pdev->dev, "unable to allocate memory for USB2
>> PHY\n");
>> @@ -172,7 +203,7 @@ static int omap_usb2_probe(struct platform_device
>> *pdev)
>> phy->dev = &pdev->dev;
>>
>> phy->phy.dev = phy->dev;
>> - phy->phy.label = "omap-usb2";
>> + phy->phy.label = phy_data->label;
>> phy->phy.set_suspend = omap_usb2_suspend;
>> phy->phy.otg = otg;
>> phy->phy.type = USB_PHY_TYPE_USB2;
>> @@ -196,8 +227,10 @@ static int omap_usb2_probe(struct
>> platform_device *pdev)
>>
>> otg->set_host = omap_usb_set_host;
>> otg->set_peripheral = omap_usb_set_peripheral;
>> - otg->set_vbus = omap_usb_set_vbus;
>> - otg->start_srp = omap_usb_start_srp;
>> + if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS)
>> + otg->set_vbus = omap_usb_set_vbus;
>> + if (phy_data->flags & OMAP_USB2_HAS_START_SRP)
>> + otg->start_srp = omap_usb_start_srp;
>> otg->phy = &phy->phy;
>>
>> platform_set_drvdata(pdev, phy);
>> @@ -297,14 +330,6 @@ static const struct dev_pm_ops omap_usb2_pm_ops = {
>> #define DEV_PM_OPS NULL
>> #endif
>>
>> -#ifdef CONFIG_OF
>> -static const struct of_device_id omap_usb2_id_table[] = {
>> - { .compatible = "ti,omap-usb2" },
>> - {}
>> -};
>> -MODULE_DEVICE_TABLE(of, omap_usb2_id_table);
>> -#endif
>> -
>> static struct platform_driver omap_usb2_driver = {
>> .probe = omap_usb2_probe,
>> .remove = omap_usb2_remove,
>> diff --git a/include/linux/usb/omap_usb.h b/include/linux/usb/omap_usb.h
>> index 6ae2936..034161d 100644
>> --- a/include/linux/usb/omap_usb.h
>> +++ b/include/linux/usb/omap_usb.h
>> @@ -42,6 +42,15 @@ struct omap_usb {
>> u8 is_suspended:1;
>> };
>>
>> +struct usb_phy_data {
>> + const char *label;
>> + u32 flags;
>
> u8 should be sufficient no?
>
> Can you also refresh the patch on linux-phy next?
>
Refreshed and sent v2
> Thanks
> Kishon


--
-George



\
 
 \ /
  Last update: 2014-03-06 14:21    [W:0.044 / U:2.736 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site