lkml.org 
[lkml]   [2014]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v10 2/3] mmc: sdhci-msm: Initial support for Qualcomm chipsets
On 03/05/2014 06:41 AM, Ulf Hansson wrote:
> On 4 March 2014 20:27, Georgi Djakov <gdjakov@mm-sol.com> wrote:
[..]
>> +
>> +struct sdhci_msm_pltfm_data {
>> + u32 caps; /* Supported UHS-I Modes */
>> + u32 caps2; /* More capabilities */
>
> Why do you need these caps, there are already a part of the mmc host.
>

Thanks! Will remove.

>> + struct regulator *vdd; /* VDD/VCC regulator */
>> + struct regulator *vdd_io; /* VDD IO regulator */
>
> Why do you need to duplicate the regulators for sdhci_msm? sdhci core
> is already taking care of regulators, I suppose you should adopt to
> that!?
>

Ok, I'll try to adopt this.

>> +};
>> +
>> +struct sdhci_msm_host {
>> + struct platform_device *pdev;
>> + void __iomem *core_mem; /* MSM SDCC mapped address */
>> + int pwr_irq; /* power irq */
>> + struct clk *clk; /* main SD/MMC bus clock */
>> + struct clk *pclk; /* SDHC peripheral bus clock */
>> + struct clk *bus_clk; /* SDHC bus voter clock */
>> + struct sdhci_msm_pltfm_data pdata;
>> + struct mmc_host *mmc;
>> + struct sdhci_pltfm_data sdhci_msm_pdata;
>> +};
>> +
[..]
>> +static int sdhci_msm_vreg_init(struct device *dev,
>> + struct sdhci_msm_pltfm_data *pdata)
>> +{
>> + pdata->vdd = devm_regulator_get(dev, "vdd-supply");
>> + if (IS_ERR(pdata->vdd))
>> + return PTR_ERR(pdata->vdd);
>> +
>> + pdata->vdd_io = devm_regulator_get(dev, "vdd-io-supply");
>> + if (IS_ERR(pdata->vdd_io))
>> + return PTR_ERR(pdata->vdd_io);
>> +
>> + return 0;
>> +}
>> +
>
> The hole regulator handling seems like it's being duplicated from the
> sdhci core. If the regulator handling from the sdhci core don't suite
> your need I guess you should extend that instead - to prevent the
> duplication of code and structs.
>
> Moreover I think it's time for sdhci core to move on to use the
> mmc_regulator_get_supply() API. Additionally it should be able to use
> mmc_regulator_set_ocr() API to change voltage. I guess that's not
> related to this patch though, but just wanted to provide you my view
> on it.

Ok, I see. Thanks for the hints!

[..]
>> + ret = sdhci_add_host(host);
>> + if (ret) {
>> + dev_err(&pdev->dev, "Add host failed (%d)\n", ret);
>> + goto vreg_disable;
>> + }
>> +
>> + ret = clk_set_rate(msm_host->clk, host->max_clk);
>
> Don't you need to set the rate before adding the host?
>

I will just make use of the sdhci core for clock setup too. Thanks for
reviewing!

BR,
Georgi


\
 
 \ /
  Last update: 2014-03-05 22:01    [W:0.109 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site