lkml.org 
[lkml]   [2014]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: i915 resume-from-hibernation problems on resume with current Linus' tree
    On Wed, Mar 05, 2014 at 06:06:40PM +0100, Borislav Petkov wrote:
    > On Tue, Mar 04, 2014 at 02:45:09PM +0100, Borislav Petkov wrote:
    > > On Mon, Mar 03, 2014 at 03:20:11PM +0100, Jiri Kosina wrote:
    > > > I encountered this again with -rc5.
    > > >
    > > > If there is anything I can do to help debug this, please let me know.
    > >
    > > I have a similar issue where the screen blanks after the machine idle
    > > timeout expires (not suspending the box - just leaving it idle) and then
    > > when I press any button to wake up the screen, it remains off. The box
    > > is otherwise alive, I can log into it and restart X. Then the screen is
    > > back on. This started appearing in the -rc3-4 timeframe AFAICT.
    > >
    > > My GPU is
    > >
    > > 00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09) (prog-if 00 [VGA controller])
    > > Subsystem: Lenovo Device 21fa
    > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
    > > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
    > > Latency: 0
    > > Interrupt: pin A routed to IRQ 42
    > > Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
    > > Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
    > > Region 4: I/O ports at 4000 [size=64]
    > > Expansion ROM at <unassigned> [disabled]
    > > Capabilities: <access denied>
    > > Kernel driver in use: i915
    > > 00: 86 80 66 01 07 04 90 00 09 00 00 03 00 00 00 00
    > > 10: 04 00 00 f0 00 00 00 00 0c 00 00 e0 00 00 00 00
    > > 20: 01 40 00 00 00 00 00 00 00 00 00 00 aa 17 fa 21
    > > 30: 00 00 00 00 90 00 00 00 00 00 00 00 0b 01 00 00
    > >
    > > Maybe I should say that I'm booting the box with
    > >
    > > [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.14.0-rc5+ root=/dev/sdb2 ro root=/dev/sdb2 ignore_loglevel log_buf_len=10M resume=/dev/sdb1 i915.i915_enable_rc6=4 i915.i915_enable_fbc=1 i915.lvds_downclock=1 i915.powersave=1
    >
    > From looking at
    >
    > http://lkml.kernel.org/r/1394011994-30604-1-git-send-email-daniel.vetter@ffwll.ch
    >
    > it looks like I should stop using the rc6/fbc settings?
    >
    > :-)

    Indeed. If going back to defaults fixes your issues, then it's not a real
    bug. There are reasons the defaults are as-is ...
    -Daniel
    --
    Daniel Vetter
    Software Engineer, Intel Corporation
    +41 (0) 79 365 57 48 - http://blog.ffwll.ch


    \
     
     \ /
      Last update: 2014-03-05 19:02    [W:3.198 / U:0.380 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site