lkml.org 
[lkml]   [2014]   [Mar]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v5 6/6] arm/dts: added dt properties to adapt to the new phy framwork
    Tony/Benoit,

    On Monday 03 March 2014 05:08 PM, Kishon Vijay Abraham I wrote:
    > Added device tree bindings for dwc3, usb2 and usb3 PHYs. The documentation
    > of these can be found at Documentation/devicetree/bindings/phy/phy-bindings.txt
    > and Documentation/devicetree/bindings/phy/ti-phy.txt.

    Can this patch be queued for 3.15 merge window?

    Thanks
    Kishon

    >
    > Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
    > ---
    > arch/arm/boot/dts/omap5.dtsi | 5 ++++-
    > 1 file changed, 4 insertions(+), 1 deletion(-)
    >
    > diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
    > index a72813a..1c68558 100644
    > --- a/arch/arm/boot/dts/omap5.dtsi
    > +++ b/arch/arm/boot/dts/omap5.dtsi
    > @@ -732,7 +732,8 @@
    > compatible = "snps,dwc3";
    > reg = <0x4a030000 0x10000>;
    > interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>;
    > - usb-phy = <&usb2_phy>, <&usb3_phy>;
    > + phys = <&usb2_phy>, <&usb3_phy>;
    > + phy-names = "usb2-phy", "usb3-phy";
    > dr_mode = "peripheral";
    > tx-fifo-resize;
    > };
    > @@ -749,6 +750,7 @@
    > compatible = "ti,omap-usb2";
    > reg = <0x4a084000 0x7c>;
    > ctrl-module = <&omap_control_usb2phy>;
    > + #phy-cells = <0>;
    > };
    >
    > usb3_phy: usb3phy@4a084400 {
    > @@ -758,6 +760,7 @@
    > <0x4a084c00 0x40>;
    > reg-names = "phy_rx", "phy_tx", "pll_ctrl";
    > ctrl-module = <&omap_control_usb3phy>;
    > + #phy-cells = <0>;
    > };
    > };
    >
    >


    \
     
     \ /
      Last update: 2014-03-05 17:42    [W:5.389 / U:0.028 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site