lkml.org 
[lkml]   [2014]   [Mar]   [31]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RFC 3/3] nand: pl353: Add driver for arm pl353 smc nand interface
On 03/31/2014 02:46 PM, Michal Simek wrote:
> On 03/27/2014 07:21 PM, Punnaiah Choudary Kalluri wrote:
>> Add driver for arm pl353 static memory controller nand interface.
>> This controller is used in xilinx zynq soc for interfacing the nand
>> flash memory.
>>
>> Signed-off-by: Punnaiah Choudary Kalluri <punnaia@xilinx.com>
>> ---
>> drivers/mtd/nand/Kconfig | 8 +
>> drivers/mtd/nand/Makefile | 1 +
>> drivers/mtd/nand/pl353_nand.c | 1122 +++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 1131 insertions(+), 0 deletions(-)
>> create mode 100644 drivers/mtd/nand/pl353_nand.c
>>
>> diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
>> index 90ff447..31c1d0c 100644
>> --- a/drivers/mtd/nand/Kconfig
>> +++ b/drivers/mtd/nand/Kconfig
>> @@ -510,4 +510,12 @@ config MTD_NAND_XWAY
>> Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
>> to the External Bus Unit (EBU).
>>
>> +config MTD_NAND_PL353
>> + tristate "ARM Pl353 NAND flash driver"
>> + depends on MTD_NAND && ARM
>> + select PL353_SMC
>
> Here should be probably depends on PL353_SMC.
> I just found it.

Just to be accurate.
When MEMORY=n with select PL353_SMC you are not able select PL353_SMC
and compile it.

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-03-31 16:22    [W:0.081 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site