lkml.org 
[lkml]   [2014]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 25/47] mtd: nand: stm_nand_bch: bad block marking helpers
Date
Bad Block Markers (BBMs) keep track of unusable/unsuitable memory
blocks which can prevent unnecessary data loss. These helpers aid in
reading and writing to/from the Bad Block Tables (BBTs) where the BBMs
are stored.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)

diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 5bcaabbc..e1c71be 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -495,6 +495,35 @@ static uint8_t bch_write_page(struct nandi_controller *nandi,
return status;
}

+/*
+ * Bad Block Tables/Bad Block Markers
+ */
+#define BBT_MARK_BAD_FACTORY 0x0
+#define BBT_MARK_BAD_WEAR 0x1
+#define BBT_MARK_GOOD 0x3
+
+static void bbt_set_block_mark(uint8_t *bbt, uint32_t block, uint8_t mark)
+{
+ unsigned int byte = block >> 2;
+ unsigned int shift = (block & 0x3) << 1;
+
+ bbt[byte] &= ~(0x3 << shift);
+ bbt[byte] |= ((mark & 0x3) << shift);
+}
+
+static uint8_t bbt_get_block_mark(uint8_t *bbt, uint32_t block)
+{
+ unsigned int byte = block >> 2;
+ unsigned int shift = (block & 0x3) << 1;
+
+ return (bbt[byte] >> shift) & 0x3;
+}
+
+static int bbt_is_block_bad(uint8_t *bbt, uint32_t block)
+{
+ return bbt_get_block_mark(bbt, block) == BBT_MARK_GOOD ? 0 : 1;
+}
+
/* Scan block for IBBT signature */
static int bch_find_ibbt_sig(struct nandi_controller *nandi,
uint32_t block, int *bak, uint8_t *vers,
--
1.8.3.2


\
 
 \ /
  Last update: 2014-03-25 11:01    [W:0.424 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site