lkml.org 
[lkml]   [2014]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 32/47] mtd: nand: stm_nand_bch: scan for BBMs and build memory-resident BBT
Date
If at start-up time we can't find our own pre-built memory-resident BBT
(e.g. at first run) this routine will search for factory set BBMs and
duplicate them into our own BBT for local consumption.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)

diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 29eeee8..d7d97720 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -703,6 +703,33 @@ static int nandi_scan_bad_block_markers_block(struct nandi_controller *nandi,
return 0;
}

+/* Scan for BBMs and build memory-resident BBT */
+static int nandi_scan_build_bbt(struct nandi_controller *nandi,
+ struct nandi_bbt_info *bbt_info)
+{
+ struct mtd_info *mtd = &nandi->info.mtd;
+ struct nand_chip *chip = mtd->priv;
+ uint32_t page_size = mtd->writesize;
+ uint8_t *bbt = bbt_info->bbt;
+ uint32_t block;
+
+ dev_dbg(nandi->dev,
+ "scan device for bad-block markers [bbt options = 0x%02x]\n",
+ chip->bbt_options);
+
+ memset(bbt, 0xff, page_size);
+ bbt_info->bbt_vers[0] = 0;
+ bbt_info->bbt_vers[1] = 0;
+ bbt_info->bbt_block[0] = nandi->blocks_per_device - 1;
+ bbt_info->bbt_block[1] = nandi->blocks_per_device - 2;
+
+ for (block = 0; block < nandi->blocks_per_device; block++)
+ if (nandi_scan_bad_block_markers_block(nandi, block))
+ bbt_set_block_mark(bbt, block, BBT_MARK_BAD_FACTORY);
+
+ return 0;
+}
+
/* Populate IBBT BCH Header */
static void bch_fill_ibbt_header(struct nandi_controller *nandi,
struct nand_ibbt_bch_header *ibbt_header,
--
1.8.3.2


\
 
 \ /
  Last update: 2014-03-25 10:21    [W:0.234 / U:0.160 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site