lkml.org 
[lkml]   [2014]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 35/47] mtd: nand: stm_nand_bch: dump bad blocks
Date
Inform the user of any known bad blocks during initialisation.
Conversely, if there aren't any known bad blocks, let the user know
the good news.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index 6698b1f..abbb4d9 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -1060,6 +1060,28 @@ static int bch_load_bbt(struct nandi_controller *nandi,
return 0;
}

+static void nandi_dump_bad_blocks(struct nandi_controller *nandi)
+{
+ int bad_count = 0;
+ uint32_t block;
+ uint8_t *bbt = nandi->info.bbt_info.bbt;
+ uint8_t mark;
+
+ pr_info("BBT:\n");
+ for (block = 0; block < nandi->blocks_per_device; block++) {
+ mark = bbt_get_block_mark(bbt, block);
+ if (mark != BBT_MARK_GOOD) {
+ pr_info("\t\tBlock 0x%08x [%05u] marked bad [%s]\n",
+ block << nandi->block_shift, block,
+ (mark == BBT_MARK_BAD_FACTORY) ?
+ "Factory" : "Wear");
+ bad_count++;
+ }
+ }
+ if (bad_count == 0)
+ pr_info("\t\tNo bad blocks listed in BBT\n");
+}
+
/*
* Initialisation
*/
@@ -1849,6 +1871,8 @@ static int stm_nand_bch_probe(struct platform_device *pdev)
return err;
}

+ nandi_dump_bad_blocks(nandi);
+
return 0;
}

--
1.8.3.2


\
 
 \ /
  Last update: 2014-03-25 10:21    [W:0.448 / U:0.072 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site