lkml.org 
[lkml]   [2014]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] staging: comedi: s626: use comedi_timeout() on remaining loops
Date
There were just a handful of more while loops in this file that needed
timeouts, and this patch takes care of them. One new callback is
introduced, and all of the proper comedi_timeout() calls are then used.

Signed-off-by: Chase Southwood <chase.southwood@yahoo.com>
---
2: s626_i2c_handshake_eoc() can be used in s626_initialize() as noted by
Ian. So, s626_initialize_eoc() has been removed, and its uses swapped
for s626_i2c_handshake_eoc().

drivers/staging/comedi/drivers/s626.c | 34 ++++++++++++++++++++++++++--------
1 file changed, 26 insertions(+), 8 deletions(-)

diff --git a/drivers/staging/comedi/drivers/s626.c b/drivers/staging/comedi/drivers/s626.c
index 95fadf3..865cf93 100644
--- a/drivers/staging/comedi/drivers/s626.c
+++ b/drivers/staging/comedi/drivers/s626.c
@@ -295,10 +295,24 @@ static void s626_debi_replace(struct comedi_device *dev, unsigned int addr,

/* ************** EEPROM ACCESS FUNCTIONS ************** */

+static int s626_i2c_handshake_eoc(struct comedi_device *dev,
+ struct comedi_subdevice *s,
+ struct comedi_insn *insn,
+ unsigned long context)
+{
+ unsigned int status;
+
+ status = s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
+ if (status)
+ return 0;
+ return -EBUSY;
+}
+
static uint32_t s626_i2c_handshake(struct comedi_device *dev, uint32_t val)
{
struct s626_private *devpriv = dev->private;
unsigned int ctrl;
+ uint32_t ret;

/* Write I2C command to I2C Transfer Control shadow register */
writel(val, devpriv->mmio + S626_P_I2CCTRL);
@@ -308,8 +322,9 @@ static uint32_t s626_i2c_handshake(struct comedi_device *dev, uint32_t val)
* wait for upload confirmation.
*/
s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
- while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
- ;
+ ret = comedi_timeout(dev, NULL, NULL, s626_i2c_handshake_eoc, 0);
+ if (ret)
+ return ret;

/* Wait until I2C bus transfer is finished or an error occurs */
do {
@@ -2029,8 +2044,9 @@ static int s626_ai_insn_read(struct comedi_device *dev,
/* Wait for the data to arrive in FB BUFFER 1 register. */

/* Wait for ADC done */
- while (!(readl(devpriv->mmio + S626_P_PSR) & S626_PSR_GPIO2))
- ;
+ ret = comedi_timeout(dev, s, insn, s626_ai_eoc, 0);
+ if (ret)
+ return ret;

/* Fetch ADC data from audio interface's input shift register. */

@@ -2681,8 +2697,9 @@ static int s626_initialize(struct comedi_device *dev)
writel(S626_I2C_CLKSEL | S626_I2C_ABORT,
devpriv->mmio + S626_P_I2CSTAT);
s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
- while (!(readl(devpriv->mmio + S626_P_MC2) & S626_MC2_UPLD_IIC))
- ;
+ ret = comedi_timeout(dev, NULL, NULL, s626_i2c_handshake_eoc, 0);
+ if (ret)
+ return ret;

/*
* Per SAA7146 data sheet, write to STATUS
@@ -2691,8 +2708,9 @@ static int s626_initialize(struct comedi_device *dev)
for (i = 0; i < 2; i++) {
writel(S626_I2C_CLKSEL, devpriv->mmio + S626_P_I2CSTAT);
s626_mc_enable(dev, S626_MC2_UPLD_IIC, S626_P_MC2);
- while (!s626_mc_test(dev, S626_MC2_UPLD_IIC, S626_P_MC2))
- ;
+ ret = comedi_timeout(dev, NULL, NULL, s626_i2c_handshake_eoc, 0);
+ if (ret)
+ return ret;
}

/*
--
1.8.5.3


\
 
 \ /
  Last update: 2014-03-26 05:01    [W:0.088 / U:0.964 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site