lkml.org 
[lkml]   [2014]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 11/14] ARM: mvebu: Set the start address of a CPU in a separate function
Date
Setting the start (or boot) address of a CPU is no more used only
during SMP bring up, but it will also be used by the CPU idle
functions or later by the CPU hot plug ones.

This commit moves it in a separate function.

Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
---
arch/arm/mach-mvebu/pmsu.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/arch/arm/mach-mvebu/pmsu.c b/arch/arm/mach-mvebu/pmsu.c
index c45029f0c0b4..3fc25d94e893 100644
--- a/arch/arm/mach-mvebu/pmsu.c
+++ b/arch/arm/mach-mvebu/pmsu.c
@@ -76,6 +76,12 @@ static struct of_device_id of_pmsu_table[] = {
{ /* end of list */ },
};

+static void armada_370_xp_pmsu_set_start_addr(void *start_addr, int hw_cpu)
+{
+ writel(virt_to_phys(start_addr), pmsu_mp_base +
+ PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+}
+
#ifdef CONFIG_SMP
int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr)
{
@@ -88,8 +94,7 @@ int armada_xp_boot_cpu(unsigned int cpu_id, void *boot_addr)

hw_cpu = cpu_logical_map(cpu_id);

- writel(virt_to_phys(boot_addr), pmsu_mp_base +
- PMSU_BOOT_ADDR_REDIRECT_OFFSET(hw_cpu));
+ armada_370_xp_pmsu_set_start_addr(boot_addr, hw_cpu);

/* Release CPU from reset by clearing reset bit*/
reg = readl(pmsu_reset_base + PMSU_RESET_CTL_OFFSET(hw_cpu));
--
1.8.1.2


\
 
 \ /
  Last update: 2014-03-26 00:41    [W:0.195 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site