lkml.org 
[lkml]   [2014]   [Mar]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC 34/47] mtd: nand: stm_nand_bch: load flash-resident BBT
Date
If load of existing BBT fails (first run), scan device for factory-set
BBMs (Bad-Block Markers) and create a new flash-resident.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
---
drivers/mtd/nand/stm_nand_bch.c | 15 +++++++++++++++
1 file changed, 15 insertions(+)

diff --git a/drivers/mtd/nand/stm_nand_bch.c b/drivers/mtd/nand/stm_nand_bch.c
index d1d84c1..6698b1f 100644
--- a/drivers/mtd/nand/stm_nand_bch.c
+++ b/drivers/mtd/nand/stm_nand_bch.c
@@ -1834,6 +1834,21 @@ static int stm_nand_bch_probe(struct platform_device *pdev)
if (err)
return err;

+ /* Load Flash-resident BBT */
+ err = bch_load_bbt(nandi, bbt_info);
+ if (err) {
+ dev_warn(nandi->dev,
+ "failed to find BBTs:"
+ " scanning device for bad-block markers\n");
+
+ /* Scan, build, and write BBT */
+ nandi_scan_build_bbt(nandi, bbt_info);
+ err = bch_update_bbts(nandi, bbt_info, NAND_IBBT_UPDATE_BOTH,
+ bbt_info->bbt_vers[0] + 1);
+ if (err)
+ return err;
+ }
+
return 0;
}

--
1.8.3.2


\
 
 \ /
  Last update: 2014-03-25 10:21    [W:0.208 / U:0.076 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site