lkml.org 
[lkml]   [2014]   [Mar]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 8/9] dp83640: let external input pins from the module parameters be defaults.
Date
This patch changes the driver to use the new pin configuration method when
programming the external time stamp input signals.

Signed-off-by: Richard Cochran <richardcochran@gmail.com>
---
drivers/net/phy/dp83640.c | 5 ++++-
1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/dp83640.c b/drivers/net/phy/dp83640.c
index 43b583b..93db564 100644
--- a/drivers/net/phy/dp83640.c
+++ b/drivers/net/phy/dp83640.c
@@ -468,7 +468,10 @@ static int ptp_dp83640_enable(struct ptp_clock_info *ptp,
event_num = EXT_EVENT + index;
evnt = EVNT_WR | (event_num & EVNT_SEL_MASK) << EVNT_SEL_SHIFT;
if (on) {
- gpio_num = gpio_tab[EXTTS0_GPIO + index];
+ gpio_num = 1 + ptp_find_pin(clock->ptp_clock,
+ PTP_PF_EXTTS, index);
+ if (gpio_num < 1)
+ return -EINVAL;
evnt |= (gpio_num & EVNT_GPIO_MASK) << EVNT_GPIO_SHIFT;
if (rq->extts.flags & PTP_FALLING_EDGE)
evnt |= EVNT_FALL;
--
1.7.10.4


\
 
 \ /
  Last update: 2014-03-20 23:01    [W:0.880 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site