Messages in this thread | | | Date | Thu, 20 Mar 2014 11:09:14 +0100 | From | Lothar Waßmann <> | Subject | Re: [PATCH] mtd: gpmi: make blockmark swapping optional |
| |
Hi,
Huang Shijie wrote: > 于 2014年03月20日 17:21, Lothar Waßmann 写道: > > Hi, > > > > Huang Shijie wrote: > >> 于 2014年03月19日 21:23, y@karo-electronics.de 写道: > >>> configurable via DT. This is required for the Ka-Ro electronics > >>> platforms. > >>> > >> If you disable the swapping, you will disable the NAND boot in actually. > >> > > No. All our modules do boot from NAND and none of them does the > > swapping. > > > > > It seems the NAND boot runs well by luck. > > The ROM will do the swapping when it reads the BBT table written by the > kobs-ng (or something else?). > This can be disabled by parameter in the FCB (at least according to the i.MX6 reference Manual): |DISBBM 172 4 If 0 ROM will swap BadBlockMarkerByte with | metadata[0] after reading a page using BCH40. | If the value set is 1 then ROM will not do | swapping
Lothar Waßmann -- ___________________________________________________________
Ka-Ro electronics GmbH | Pascalstraße 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Geschäftsführer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996
www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
| |