lkml.org 
[lkml]   [2014]   [Mar]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCHv4 2/2] arm: Get rid of meminfo
On 3/12/2014 9:08 AM, Grygorii Strashko wrote:
> On 03/12/2014 03:38 PM, Russell King - ARM Linux wrote:
>> On Wed, Mar 12, 2014 at 03:09:53PM +0200, Grygorii Strashko wrote:
>>> Hi Russell,
>>>
>>> On 03/12/2014 10:54 AM, Russell King - ARM Linux wrote:
>>>> On Tue, Feb 18, 2014 at 02:15:33PM -0800, Laura Abbott wrote:
>>>>> memblock is now fully integrated into the kernel and is the prefered
>>>>> method for tracking memory. Rather than reinvent the wheel with
>>>>> meminfo, migrate to using memblock directly instead of meminfo as
>>>>> an intermediate.
>>>>>
>>>>> Acked-by: Jason Cooper <jason@lakedaemon.net>
>>>>> Acked-by: Catalin Marinas <catalin.marinas@arm.com>
>>>>> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
>>>>> Acked-by: Kukjin Kim <kgene.kim@samsung.com>
>>>>> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
>>>>> Tested-by: Leif Lindholm <leif.lindholm@linaro.org>
>>>>> Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
>>>>
>>>> Laura,
>>>>
>>>> This patch causes a bunch of platforms to no longer boot - imx6solo with
>>>> 1GB of RAM boots, imx6q with 2GB of RAM doesn't. Versatile Express doesn't.
>>>>
>>>> The early printk messages don't reveal anything too interesting:
>>>>
>>>> Booting Linux on physical CPU 0x0
>>>> Linux version 3.14.0-rc6+ (rmk@rmk-PC.arm.linux.org.uk) (gcc version 4.6.4 (GCC) ) #630 SMP Wed Mar 12 01:13:36 GMT 2014
>>>> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
>>>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>>>> Machine model: SolidRun Cubox-i Dual/Quad
>>>> cma: CMA: reserved 64 MiB at 8c000000
>>>> Memory policy: Data cache writealloc
>>>> <hang>
>>>>
>>>> vs.
>>>>
>>>> Booting Linux on physical CPU 0x0
>>>> Linux version 3.14.0-rc6+ (rmk@rmk-PC.arm.linux.org.uk) (gcc version 4.6.4 (GCC) ) #631 SMP Wed Mar 12 01:15:37 GMT 2014
>>>> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
>>>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>>>> Machine model: SolidRun Cubox-i Dual/Quad
>>>> cma: CMA: reserved 64 MiB at 3b800000
>>>> Memory policy: Data cache writealloc
>>>> On node 0 totalpages: 524288
>>>> free_area_init_node: node 0, pgdat c09d0240, node_mem_map ea7d8000
>>>> Normal zone: 1520 pages used for memmap
>>>> Normal zone: 0 pages reserved
>>>> Normal zone: 194560 pages, LIFO batch:31
>>>> HighMem zone: 2576 pages used for memmap
>>>> HighMem zone: 329728 pages, LIFO batch:31
>>>> ...
>>>>
>>>> The only obvious difference is the address of that CMA reservation,
>>>> CMA shouldn't make a difference here - but I suspect that other
>>>> allocations which need to be in lowmem probably aren't.
>>>>
>>>
>>> Could it be possible to enable memblock debug by adding "memblock=debug"
>>> in cmdline?
>>
>> Here's with Laura's patch:
>>
>> Uncompressing Linux... done, booting the kernel.
>> Booting Linux on physical CPU 0x0
>> Linux version 3.14.0-rc6+ (rmk@rmk-PC.arm.linux.org.uk) (gcc version 4.6.4 (GCC) ) #633 SMP Wed Mar 12 12:56:15 GMT 2014
>> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>> Machine model: SolidRun Cubox-i Dual/Quad
>> memblock_reserve: [0x00000010008240-0x0000001112c1f7] flags 0x0 arm_memblock_init+0x28/0x1a8
>> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_memblock_init+0x108/0x1a8
>> memblock_reserve: [0x00000010004000-0x00000010007fff] flags 0x0 arm_mm_memblock_reserve+0x1c/0x24
>> memblock_reserve: [0x00000018000000-0x0000001800b07f] flags 0x0 arm_dt_memblock_reserve+0x2c/0x70
>> memblock_reserve: [0x00000018000000-0x0000001800afff] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
>> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
>> memblock_reserve: [0x0000008c000000-0x0000008fffffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>> cma: CMA: reserved 64 MiB at 8c000000
>> MEMBLOCK configuration:
>> memory size = 0x80000000 reserved size = 0x52fda50
>> memory.cnt = 0x1
>> memory[0x0] [0x00000010000000-0x0000008fffffff], 0x80000000 bytes flags: 0x06
>> reserved.cnt = 0x5
>> reserved[0x0] [0x00000010004000-0x00000010007fff], 0x4000 bytes flags: 0x0
>> reserved[0x1] [0x00000010008240-0x0000001112c1f7], 0x1123fb8 bytes flags: 0x0
>> reserved[0x2] [0x00000018000000-0x0000001800b07f], 0xb080 bytes flags: 0x0
>> reserved[0x3] [0x00000020000040-0x000000201caa57], 0x1caa18 bytes flags: 0x0
>> reserved[0x4] [0x0000008c000000-0x0000008fffffff], 0x4000000 bytes flags: 0x0
>> Memory policy: Data cache writealloc
>> memblock_reserve: [0x0000008bffffd8-0x0000008bffffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>>
>> Here's without:
>>
>> Booting Linux on physical CPU 0x0
>> Linux version 3.14.0-rc6+ (rmk@rmk-PC.arm.linux.org.uk) (gcc version 4.6.4 (GCC) ) #635 SMP Wed Mar 12 13:22:15 GMT 2014
>> CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
>> CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
>> Machine model: SolidRun Cubox-i Dual/Quad
>> memblock_reserve: [0x00000010008240-0x0000001112c277] flags 0x0 arm_memblock_init+0x54/0x1d4
>> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_memblock_init+0x134/0x1d4
>> memblock_reserve: [0x00000010004000-0x00000010007fff] flags 0x0 arm_mm_memblock_reserve+0x1c/0x24
>> memblock_reserve: [0x00000018000000-0x0000001800b07f] flags 0x0 arm_dt_memblock_reserve+0x2c/0x70
>> memblock_reserve: [0x00000018000000-0x0000001800afff] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
>> memblock_reserve: [0x00000020000040-0x000000201caa57] flags 0x0 arm_dt_memblock_reserve+0x68/0x70
>> memblock_reserve: [0x0000003b800000-0x0000003f7fffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>> cma: CMA: reserved 64 MiB at 3b800000
>> MEMBLOCK configuration:
>> memory size = 0x80000000 reserved size = 0x52fdad0
>> memory.cnt = 0x1
>> memory[0x0] [0x00000010000000-0x0000008fffffff], 0x80000000 bytes flags: 0x0
>> reserved.cnt = 0x5
>> reserved[0x0] [0x00000010004000-0x00000010007fff], 0x4000 bytes flags: 0x0
>> reserved[0x1] [0x00000010008240-0x0000001112c277], 0x1124038 bytes flags: 0x0
>> reserved[0x2] [0x00000018000000-0x0000001800b07f], 0xb080 bytes flags: 0x0
>> reserved[0x3] [0x00000020000040-0x000000201caa57], 0x1caa18 bytes flags: 0x0
>> reserved[0x4] [0x0000003b800000-0x0000003f7fffff], 0x4000000 bytes flags: 0x0
>> Memory policy: Data cache writealloc
>> memblock_reserve: [0x0000003b7fffd8-0x0000003b7fffff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>> memblock_reserve: [0x0000003b7fe000-0x0000003b7fefff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>> memblock_reserve: [0x0000003b7fd000-0x0000003b7fdfff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>> memblock_reserve: [0x0000003b7fc000-0x0000003b7fcfff] flags 0x0 memblock_alloc_base_nid+0x40/0x54
>> ...
>>
>> So it looks like allocations which must come from lowmem aren't being
>> limited to lowmem.
>>
>> Try booting a machine with 2G of RAM with page offset set to 3GB and
>> highmem enabled - it will fail as per the above.
>>
>> In fact, if we look at sanity_check_meminfo() post that patch, it's
>> clearly wrong:
>>
>> for_each_memblock(memory, reg) {
>> phys_addr_t block_start = reg->base;
>> phys_addr_t block_end = reg->base + reg->size;
>> phys_addr_t size_limit = reg->size;
>>
>> if (reg->base >= vmalloc_limit)
>> highmem = 1;
>> else
>> size_limit = vmalloc_limit - reg->base;
>> ...
>> if (!highmem) {
>> if (block_end > arm_lowmem_limit)
>> arm_lowmem_limit = block_end;
>
> In v3, above was
> arm_lowmem_limit = reg->base + size_limit;
>
> so, it has worked somehow, even arm_lowmem_limit can point on non
> existed address. It was changed because of my comment - sorry.
>
> I think, it should be smth like:
> if (!highmem) {
> if (block_end > arm_lowmem_limit)
> if (reg->size > size_limit)
> arm_lowmem_limit = vmalloc_limit;
> else
> arm_lowmem_limit = block_end;
>
> I've created and attached the patch which allows me to boot on keystone.
>
>> ...
>> }
>
> regards,
> -grygorii
>
> From 3a210330f15c4cfc6728d83b28750c696d9eaefb Mon Sep 17 00:00:00 2001
> From: Grygorii Strashko <x0174654@uglx0174654.(none)>
> Date: Wed, 12 Mar 2014 18:04:02 +0200
> Subject: [PATCH] arm: get rid of meminfo: fix lowmem_limit calculation
>
> Signed-off-by: Grygorii Strashko <x0174654@uglx0174654.(none)>
> ---
> arch/arm/mm/mmu.c | 10 +++++++---
> 1 file changed, 7 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c
> index c3ae96c..f8b5175 100644
> --- a/arch/arm/mm/mmu.c
> +++ b/arch/arm/mm/mmu.c
> @@ -1096,8 +1096,12 @@ void __init sanity_check_meminfo(void)
> }
>
> if (!highmem) {
> - if (block_end > arm_lowmem_limit)
> - arm_lowmem_limit = block_end;
> + if (block_end > arm_lowmem_limit) {
> + if (reg->size > size_limit)
> + arm_lowmem_limit = vmalloc_limit;
> + else
> + arm_lowmem_limit = block_end;
> + }
>
>
> /*
> @@ -1117,7 +1121,7 @@ void __init sanity_check_meminfo(void)
> if (!IS_ALIGNED(block_start, SECTION_SIZE))
> memblock_limit = block_start;
> else if (!IS_ALIGNED(block_end, SECTION_SIZE))
> - memblock_limit = block_end;
> + memblock_limit = arm_lowmem_limit;
> }
>
> }
>

Thanks Grygorii and Russell. v5 is on my TODO list for either later this
week or next.

Laura

--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation


\
 
 \ /
  Last update: 2014-03-19 20:01    [W:3.364 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site