Messages in this thread | | | Date | Tue, 18 Mar 2014 14:47:36 -0700 | Subject | Re: [PATCH v3 1/5] Documentation: dt: Add Kona PWM binding | From | Tim Kryger <> |
| |
On Tue, Mar 18, 2014 at 2:18 PM, Thierry Reding <thierry.reding@gmail.com> wrote: > On Wed, Mar 12, 2014 at 01:15:42PM -0700, Tim Kryger wrote:
>> @@ -0,0 +1,24 @@ >> +Broadcom Kona PWM controller device tree bindings >> + >> +This controller has 6 channels. >> + >> +Required Properties : >> +- compatible: should be "brcm,kona-pwm" > > This is somewhat inconsistent because the example below clearly doesn't > set the compatible property to "brcm,kona-pwm". Perhaps better wording > would be: > > - compatible: should contain "brcm,kona-pwm"
Agreed, what you wrote is more accurate. I will update it.
>> +- reg: physical base address and length of the controller's registers >> +- clocks: phandle + clock specifier pair for the external clock >> +- #pwm-cells: should be 3. The first cell specifies the per-chip index >> + of the PWM to use, the second cell is the period in nanoseconds, and >> + the third cell is the flags. > > Please use the canonical description for this: > > - #pwm-cells: Should be 3. See pwm.txt in this directory for a > description of the cells format. > >> +Refer to pwm/pwm.txt for generic pwm controller node properties. > > With the above, this line should go away. But still: "pwm controller" -> > "PWM controller".
Okay. I will use the text you provided and drop the other line.
Sorry for missing the capitalization. I thought I had fixed them all.
Thanks, Tim
| |