lkml.org 
[lkml]   [2014]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 10/18] dma: edma: Reduce debug print verbosity for non verbose debugging
Date
Do not print the paRAM information when verbose debugging is not asked and
also reduce the number of lines printed in edma_prep_dma_cyclic()

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
drivers/dma/edma.c | 11 +++++------
1 file changed, 5 insertions(+), 6 deletions(-)

diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index e4f4a0cef58c..e2aa42b8342f 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -141,7 +141,7 @@ static void edma_execute(struct edma_chan *echan)
for (i = 0; i < nslots; i++) {
j = i + edesc->processed;
edma_write_slot(echan->slot[i], &edesc->pset[j]);
- dev_dbg(echan->vchan.chan.device->dev,
+ dev_vdbg(echan->vchan.chan.device->dev,
"\n pset[%d]:\n"
" chnum\t%d\n"
" slot\t%d\n"
@@ -554,9 +554,8 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
edesc->cyclic = 1;
edesc->pset_nr = nslots;

- dev_dbg(dev, "%s: nslots=%d\n", __func__, nslots);
- dev_dbg(dev, "%s: period_len=%d\n", __func__, period_len);
- dev_dbg(dev, "%s: buf_len=%d\n", __func__, buf_len);
+ dev_dbg(dev, "%s: channel=%d nslots=%d period_len=%d buf_len=%d\n",
+ __func__, echan->ch_num, nslots, period_len, buf_len);

for (i = 0; i < nslots; i++) {
/* Allocate a PaRAM slot, if needed */
@@ -590,8 +589,8 @@ static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
else
src_addr += period_len;

- dev_dbg(dev, "%s: Configure period %d of buf:\n", __func__, i);
- dev_dbg(dev,
+ dev_vdbg(dev, "%s: Configure period %d of buf:\n", __func__, i);
+ dev_vdbg(dev,
"\n pset[%d]:\n"
" chnum\t%d\n"
" slot\t%d\n"
--
1.9.0


\
 
 \ /
  Last update: 2014-03-13 11:01    [W:0.339 / U:0.188 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site