lkml.org 
[lkml]   [2014]   [Mar]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 1/2] i2c: Add message transfer tracepoints for I2C [ver #2]
On Thu, Mar 06, 2014 at 01:35:59PM +0000, David Howells wrote:
> Add tracepoints into the I2C message transfer function to retrieve the message
> sent or received. The following config options must be turned on to make use
> of the facility:
>
> CONFIG_FTRACE
> CONFIG_ENABLE_DEFAULT_TRACERS
>
> The I2C tracepoint can be enabled thusly:
>
> echo 1 >/sys/kernel/debug/tracing/events/i2c/i2c_transfer/enable
>
> and will dump messages that can be viewed in /sys/kernel/debug/tracing/trace
> that look like:
>
> ... i2c_write: i2c-5 #0 a=044 f=0000 l=2 [02-14]
> ... i2c_read: i2c-5 #1 a=044 f=0001 l=4
> ... i2c_reply: i2c-5 #1 a=044 f=0001 l=4 [33-00-00-00]
> ... i2c_result: i2c-5 n=2 ret=2
>
> formatted as:
>
> i2c-<adapter-nr>
> #<message-array-index>
> a=<addr>
> f=<flags>
> l=<datalen>
> n=<message-array-size>
> ret=<result>
> [<data>]
>
> The operation is done between the i2c_write/i2c_read lines and the i2c_reply
> and i2c_result lines so that if the hardware hangs, the trace buffer can be
> consulted to determine the problematic operation.
>
> The adapters to be traced can be selected by something like:
>
> echo adapter_nr==1 >/sys/kernel/debug/tracing/events/i2c/filter
>
> These changes are based on code from Steven Rostedt.
>
> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
> Signed-off-by: David Howells <dhowells@redhat.com>
> Reviewed-by: Steven Rostedt <rostedt@goodmis.org>

Applied to for-next, thanks!

[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-03-13 22:21    [W:0.330 / U:0.136 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site