lkml.org 
[lkml]   [2014]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 7/9] fsl: add EPU FSM configuration for deep sleep
On Tue, Mar 11, 2014 at 07:08:43PM -0500, Scott Wood wrote:
> On Fri, 2014-03-07 at 12:58 +0800, Chenhui Zhao wrote:
> > From: Hongbo Zhang <hongbo.zhang@freescale.com>
> >
> > In the last stage of deep sleep, software will trigger a Finite
> > State Machine (FSM) to control the hardware precedure, such as
> > board isolation, killing PLLs, removing power, and so on.
> >
> > When the system is waked up by an interrupt, the FSM controls the
> > hardware to complete the early resume precedure.
> >
> > This patch configure the EPU FSM preparing for deep sleep.
> >
> > Signed-off-by: Hongbo Zhang <hongbo.zhang@freescale.com>
> > Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
>
> Couldn't this be part of qoriq_pm.c?

Put the code in drivers/platform/fsl/ so that LS1 can share these code.

>
> > diff --git a/arch/powerpc/sysdev/fsl_soc.h b/arch/powerpc/sysdev/fsl_soc.h
> > index 9b9a34a..eb83a30 100644
> > --- a/arch/powerpc/sysdev/fsl_soc.h
> > +++ b/arch/powerpc/sysdev/fsl_soc.h
> > @@ -69,5 +69,8 @@ extern const struct fsl_pm_ops *qoriq_pm_ops;
> >
> > extern int fsl_rcpm_init(void);
> >
> > +extern void fsl_dp_fsm_setup(void *dcsr_base);
> > +extern void fsl_dp_fsm_clean(void *dcsr_base);
>
> __iomem

Thanks. Will add.

>
> > +
> > #endif
> > #endif
> > diff --git a/drivers/platform/Kconfig b/drivers/platform/Kconfig
> > index 09fde58..6539e6d 100644
> > --- a/drivers/platform/Kconfig
> > +++ b/drivers/platform/Kconfig
> > @@ -6,3 +6,7 @@ source "drivers/platform/goldfish/Kconfig"
> > endif
> >
> > source "drivers/platform/chrome/Kconfig"
> > +
> > +if FSL_SOC
> > +source "drivers/platform/fsl/Kconfig"
> > +endif
>
> Chrome doesn't need an ifdef -- why does this?

Don't wish other platform see these options, and the X86 and GOLDFISH have
ifdefs.

>
> > diff --git a/drivers/platform/Makefile b/drivers/platform/Makefile
> > index 3656b7b..37c6f72 100644
> > --- a/drivers/platform/Makefile
> > +++ b/drivers/platform/Makefile
> > @@ -6,3 +6,4 @@ obj-$(CONFIG_X86) += x86/
> > obj-$(CONFIG_OLPC) += olpc/
> > obj-$(CONFIG_GOLDFISH) += goldfish/
> > obj-$(CONFIG_CHROME_PLATFORMS) += chrome/
> > +obj-$(CONFIG_FSL_SOC) += fsl/
> > diff --git a/drivers/platform/fsl/Kconfig b/drivers/platform/fsl/Kconfig
> > new file mode 100644
> > index 0000000..72ed053
> > --- /dev/null
> > +++ b/drivers/platform/fsl/Kconfig
> > @@ -0,0 +1,10 @@
> > +#
> > +# Freescale Specific Power Management Drivers
> > +#
> > +
> > +config FSL_SLEEP_FSM
> > + bool
> > + help
> > + This driver configures a hardware FSM (Finite State Machine) for deep sleep.
> > + The FSM is used to finish clean-ups at the last stage of system entering deep
> > + sleep, and also wakes up system when a wake up event happens.
> > diff --git a/drivers/platform/fsl/Makefile b/drivers/platform/fsl/Makefile
> > new file mode 100644
> > index 0000000..d99ca0e
> > --- /dev/null
> > +++ b/drivers/platform/fsl/Makefile
> > @@ -0,0 +1,5 @@
> > +#
> > +# Makefile for linux/drivers/platform/fsl
> > +# Freescale Specific Power Management Drivers
> > +#
> > +obj-$(CONFIG_FSL_SLEEP_FSM) += sleep_fsm.o
>
> Why is this here while the other stuff is in arch/powerpc/sysdev?
>
> > +/* Block offsets */
> > +#define RCPM_BLOCK_OFFSET 0x00022000
> > +#define EPU_BLOCK_OFFSET 0x00000000
> > +#define NPC_BLOCK_OFFSET 0x00001000
>
> Why don't these block offsets come from the device tree?

Have maped DCSR registers. Don't wish to remap them.

>
> > +static void *g_dcsr_base;
>
> __iomem

OK.

>
> > + /* Configure the EPU Counters */
> > + epu_write(EPCCR15, 0x92840000);
> > + epu_write(EPCCR14, 0x92840000);
> > + epu_write(EPCCR12, 0x92840000);
> > + epu_write(EPCCR11, 0x92840000);
> > + epu_write(EPCCR10, 0x92840000);
> > + epu_write(EPCCR9, 0x92840000);
> > + epu_write(EPCCR8, 0x92840000);
> > + epu_write(EPCCR5, 0x92840000);
> > + epu_write(EPCCR4, 0x92840000);
> > + epu_write(EPCCR2, 0x92840000);
> > +
> > + /* Configure the SCUs Inputs */
> > + epu_write(EPSMCR15, 0x76000000);
> > + epu_write(EPSMCR14, 0x00000031);
> > + epu_write(EPSMCR13, 0x00003100);
> > + epu_write(EPSMCR12, 0x7F000000);
> > + epu_write(EPSMCR11, 0x31740000);
> > + epu_write(EPSMCR10, 0x65000030);
> > + epu_write(EPSMCR9, 0x00003000);
> > + epu_write(EPSMCR8, 0x64300000);
> > + epu_write(EPSMCR7, 0x30000000);
> > + epu_write(EPSMCR6, 0x7C000000);
> > + epu_write(EPSMCR5, 0x00002E00);
> > + epu_write(EPSMCR4, 0x002F0000);
> > + epu_write(EPSMCR3, 0x2F000000);
> > + epu_write(EPSMCR2, 0x6C700000);
>
> Where do these magic numbers come from? Which chips are they valid for?

They are for T1040. Can be found in the RCPM chapter of T1040RM.

>
> > +void fsl_dp_fsm_clean(void *dcsr_base)
> > +{
> > +
> > + epu_write(EPEVTCR2, 0);
> > + epu_write(EPEVTCR9, 0);
> > +
> > + epu_write(EPGCR, 0);
> > + epu_write(EPECR15, 0);
> > +
> > + rcpm_write(CSTTACR0, 0);
> > + rcpm_write(CG1CR0, 0);
> > +
> > +}
>
> Don't put blank lines at the beginning/end of a block.
>
> -Scott

Thanks.

-Chenhui



\
 
 \ /
  Last update: 2014-03-12 10:01    [W:0.772 / U:0.100 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site