lkml.org 
[lkml]   [2014]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus
On 03/12/2014 11:44 AM, Dong, Chuanxiao wrote:
> Hi Aaron,
>
> This patch is tested on Intel platform, and SDIO function driver's suspend/resume callback will only be called once, which fixed this issue. Previously, they can be called twice.
>
> Here is the tested-by:
>
> Tested-by: xiaoming wang <xiaoming.wang@intel.com>
> Tested-by: Chuanxiao Dong <chuanxiao.dong@intel.com>

Thanks a lot for the test!

-Aaron

>
> Thanks
> Chuanxiao
>
>> -----Original Message-----
>> From: Lu, Aaron
>> Sent: Wednesday, March 12, 2014 10:36 AM
>> To: Ulf Hansson; linux-mmc@vger.kernel.org; Chris Ball; Liu, Chuansheng; Dong,
>> Chuanxiao
>> Cc: linux-kernel@vger.kernel.org; NeilBrown; Rafael J. Wysocki
>> Subject: Re: [RFC PATCH] mmc: core: Invoke sdio func driver's PM callbacks from the
>> sdio bus
>>
>> Hi Chuansheng & Chuanxiao,
>>
>> Can you please help us testing this patch on your platform and let us know the test
>> result? Thanks.
>>
>> -Aaron
>>
>> On 02/28/2014 07:49 PM, Ulf Hansson wrote:
>>> The sdio func device is added to the driver model after the card
>>> device.
>>>
>>> This means the sdio func device will be suspend before the card device
>>> and thus resumed after. The consequence are the mmc core don't
>>> explicity need to protect itself from receiving sdio requests in
>>> suspended state. Instead that can be handled from the sdio bus, which
>>> is thus invokes the PM callbacks instead of old dummy function.
>>>
>>> In the case were the sdio func driver don't implement the PM callbacks
>>> the mmc core will in the early phase of system suspend, remove the
>>> card from the driver model and thus power off it.
>>>
>>> Cc: Aaron Lu <aaron.lu@intel.com>
>>> Cc: NeilBrown <neilb@suse.de>
>>> Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
>>> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
>>> ---
>>>
>>> Note, this patch has only been compile tested. Would appreciate if
>>> some with SDIO and a sdio func driver could help out to test this.
>>> Especially the libertas driver would be nice.
>>>
>>> ---
>>> drivers/mmc/core/sdio.c | 45 ++++---------------------------------------
>>> drivers/mmc/core/sdio_bus.c | 14 +-------------
>>> 2 files changed, 5 insertions(+), 54 deletions(-)
>>>
>>> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index
>>> 4d721c6..9933e42 100644
>>> --- a/drivers/mmc/core/sdio.c
>>> +++ b/drivers/mmc/core/sdio.c
>>> @@ -943,40 +943,21 @@ static int mmc_sdio_pre_suspend(struct mmc_host
>> *host)
>>> */
>>> static int mmc_sdio_suspend(struct mmc_host *host) {
>>> - int i, err = 0;
>>> -
>>> - for (i = 0; i < host->card->sdio_funcs; i++) {
>>> - struct sdio_func *func = host->card->sdio_func[i];
>>> - if (func && sdio_func_present(func) && func->dev.driver) {
>>> - const struct dev_pm_ops *pmops = func->dev.driver->pm;
>>> - err = pmops->suspend(&func->dev);
>>> - if (err)
>>> - break;
>>> - }
>>> - }
>>> - while (err && --i >= 0) {
>>> - struct sdio_func *func = host->card->sdio_func[i];
>>> - if (func && sdio_func_present(func) && func->dev.driver) {
>>> - const struct dev_pm_ops *pmops = func->dev.driver->pm;
>>> - pmops->resume(&func->dev);
>>> - }
>>> - }
>>> -
>>> - if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
>> {
>>> + if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
>>> mmc_claim_host(host);
>>> sdio_disable_wide(host->card);
>>> mmc_release_host(host);
>>> }
>>>
>>> - if (!err && !mmc_card_keep_power(host))
>>> + if (!mmc_card_keep_power(host))
>>> mmc_power_off(host);
>>>
>>> - return err;
>>> + return 0;
>>> }
>>>
>>> static int mmc_sdio_resume(struct mmc_host *host) {
>>> - int i, err = 0;
>>> + int err = 0;
>>>
>>> BUG_ON(!host);
>>> BUG_ON(!host->card);
>>> @@ -1019,24 +1000,6 @@ static int mmc_sdio_resume(struct mmc_host *host)
>>> wake_up_process(host->sdio_irq_thread);
>>> mmc_release_host(host);
>>>
>>> - /*
>>> - * If the card looked to be the same as before suspending, then
>>> - * we proceed to resume all card functions. If one of them returns
>>> - * an error then we simply return that error to the core and the
>>> - * card will be redetected as new. It is the responsibility of
>>> - * the function driver to perform further tests with the extra
>>> - * knowledge it has of the card to confirm the card is indeed the
>>> - * same as before suspending (same MAC address for network cards,
>>> - * etc.) and return an error otherwise.
>>> - */
>>> - for (i = 0; !err && i < host->card->sdio_funcs; i++) {
>>> - struct sdio_func *func = host->card->sdio_func[i];
>>> - if (func && sdio_func_present(func) && func->dev.driver) {
>>> - const struct dev_pm_ops *pmops = func->dev.driver->pm;
>>> - err = pmops->resume(&func->dev);
>>> - }
>>> - }
>>> -
>>> host->pm_flags &= ~MMC_PM_KEEP_POWER;
>>> return err;
>>> }
>>> diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
>>> index 92d1ba8..4fa8fef9 100644
>>> --- a/drivers/mmc/core/sdio_bus.c
>>> +++ b/drivers/mmc/core/sdio_bus.c
>>> @@ -197,20 +197,8 @@ static int sdio_bus_remove(struct device *dev)
>>>
>>> #ifdef CONFIG_PM
>>>
>>> -#ifdef CONFIG_PM_SLEEP
>>> -static int pm_no_operation(struct device *dev) -{
>>> - /*
>>> - * Prevent the PM core from calling SDIO device drivers' suspend
>>> - * callback routines, which it is not supposed to do, by using this
>>> - * empty function as the bus type suspend callaback for SDIO.
>>> - */
>>> - return 0;
>>> -}
>>> -#endif
>>> -
>>> static const struct dev_pm_ops sdio_bus_pm_ops = {
>>> - SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
>>> + SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
>>> SET_RUNTIME_PM_OPS(
>>> pm_generic_runtime_suspend,
>>> pm_generic_runtime_resume,
>>>
>



\
 
 \ /
  Last update: 2014-03-12 08:02    [W:0.213 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site