lkml.org 
[lkml]   [2014]   [Mar]   [12]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: dts: bcm28155-ap: leave camldo1 on to fix reboot
On 03/12/2014 08:14 AM, Matt Porter wrote:
> The BCM28155-AP board has a bootloader that expects the camldo1
> regulator to be enabled on entry. Currently, the camldo1 regulator
> is disabled when no longer in use as is the case during a reboot /
> warm reset. This causes the early bootloader to hang upon entry. Add
> regulator-always-on to the camldo1 constraint to fix reboot.
>
> Reported-by: Alex Elder <elder@linaro.org>
> Signed-off-by: Matt Porter <mporter@linaro.org>

Tested-by: Alex Elder <elder@linaro.org>

> ---
> [Depends on BCM59056 regulator series dts support:
> http://www.gossamer-threads.com/lists/linux/kernel/1885489]
>
> arch/arm/boot/dts/bcm28155-ap.dts | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
> index 99ff0c1..cc1303c 100644
> --- a/arch/arm/boot/dts/bcm28155-ap.dts
> +++ b/arch/arm/boot/dts/bcm28155-ap.dts
> @@ -94,6 +94,7 @@
> camldo1_reg: camldo1 {
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> };
>
> sdldo_reg: sdldo {
>



\
 
 \ /
  Last update: 2014-03-12 15:01    [W:0.065 / U:1.872 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site