lkml.org 
[lkml]   [2014]   [Mar]   [10]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v3 1/1] drm/i915: Enabling 128x128 and 256x256 ARGB Cursor Support
On Sun, Mar 09, 2014 at 12:19:06AM +0530, sagar.a.kamble@intel.com wrote:
> From: Sagar Kamble <sagar.a.kamble@intel.com>
>
> With this patch we allow larger cursor planes of sizes 128x128
> and 256x256.
>
> v2: Added more precise check on size while setting cursor plane.
>
> v3: Changes related to restructuring cursor size restrictions
> and DRM_DEBUG usage.
>
> Testcase: igt/kms_cursor_crc
> Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
> Cc: Jani Nikula <jani.nikula@linux.intel.com>
> Cc: David Airlie <airlied@linux.ie>
> Cc: dri-devel@lists.freedesktop.org
> Cc: linux-kernel@vger.kernel.org
> Signed-off-by: G, Pallavi <pallavi.g@intel.com>
> Signed-off-by: Sagar Kamble <sagar.a.kamble@intel.com>
> ---
> drivers/gpu/drm/i915/i915_reg.h | 4 ++++
> drivers/gpu/drm/i915/intel_display.c | 36 +++++++++++++++++++++++++++++++-----
> 2 files changed, 35 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
> index 146609a..aee8258 100644
> --- a/drivers/gpu/drm/i915/i915_reg.h
> +++ b/drivers/gpu/drm/i915/i915_reg.h
> @@ -3551,7 +3551,11 @@ enum punit_power_well {
> /* New style CUR*CNTR flags */
> #define CURSOR_MODE 0x27
> #define CURSOR_MODE_DISABLE 0x00
> +#define CURSOR_MODE_128_32B_AX 0x02
> +#define CURSOR_MODE_256_32B_AX 0x03
> #define CURSOR_MODE_64_32B_AX 0x07
> +#define CURSOR_MODE_128_ARGB_AX ((1 << 5) | CURSOR_MODE_128_32B_AX)
> +#define CURSOR_MODE_256_ARGB_AX ((1 << 5) | CURSOR_MODE_256_32B_AX)
> #define CURSOR_MODE_64_ARGB_AX ((1 << 5) | CURSOR_MODE_64_32B_AX)
> #define MCURSOR_PIPE_SELECT (1 << 28)
> #define MCURSOR_PIPE_A 0x00
> diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
> index 0868afb..e59e8fd 100644
> --- a/drivers/gpu/drm/i915/intel_display.c
> +++ b/drivers/gpu/drm/i915/intel_display.c
> @@ -7440,10 +7440,22 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
> bool visible = base != 0;
>
> if (intel_crtc->cursor_visible != visible) {
> + int16_t width = intel_crtc->cursor_width;
> uint32_t cntl = I915_READ(CURCNTR(pipe));
> if (base) {
> cntl &= ~(CURSOR_MODE | MCURSOR_PIPE_SELECT);
> - cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> +
> + switch (width) {
> + case 64:
> + cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> + break;

We don't needlessly indent case 64: and the following code. Even with that
this indents a bit too far, so I suggest you extract the width->flags
computation into a little helper and use it in both places. Also please
extract the GAMMA flag, it's something else. Finally please add a default:
case and put a WARN_ON(1) in there, to make sure our code doesn't let
invalid cases slip through.
-Daniel

> + case 128:
> + cntl |= CURSOR_MODE_128_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> + break;
> + case 256:
> + cntl |= CURSOR_MODE_256_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> + break;
> + }
> cntl |= pipe << 28; /* Connect to correct pipe */
> } else {
> cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
> @@ -7468,10 +7480,22 @@ static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
> bool visible = base != 0;
>
> if (intel_crtc->cursor_visible != visible) {
> + int16_t width = intel_crtc->cursor_width;
> uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
> if (base) {
> cntl &= ~CURSOR_MODE;
> - cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> +
> + switch (width) {
> + case 64:
> + cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> + break;
> + case 128:
> + cntl |= CURSOR_MODE_128_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> + break;
> + case 256:
> + cntl |= CURSOR_MODE_256_ARGB_AX | MCURSOR_GAMMA_ENABLE;
> + break;
> + }
> } else {
> cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
> cntl |= CURSOR_MODE_DISABLE;
> @@ -7567,9 +7591,11 @@ static int intel_crtc_cursor_set(struct drm_crtc *crtc,
> goto finish;
> }
>
> - /* Currently we only support 64x64 cursors */
> - if (width != 64 || height != 64) {
> - DRM_ERROR("we currently only support 64x64 cursors\n");
> + /* Check for which cursor types we support */
> + if (!((width == 64 && height == 64) ||
> + (width == 128 && height == 128 && !IS_GEN2(dev)) ||
> + (width == 256 && height == 256 && !IS_GEN2(dev)))) {
> + DRM_DEBUG("Cursor dimension not supported\n");
> return -EINVAL;
> }
>
> --
> 1.8.5
>

--
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch


\
 
 \ /
  Last update: 2014-03-10 11:41    [W:0.168 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site