lkml.org 
[lkml]   [2014]   [Mar]   [1]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCHv1 5/9] mfd: twl4030-madc: Use twl_i2c_read/write_u16 for 16 bit registers
Date
Simplify reading and writing of 16 bit TWL registers in the
driver by using twl_i2c_read_u16 and twl_i2c_write_u16.

Signed-off-by: Sebastian Reichel <sre@debian.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
---
drivers/mfd/twl4030-madc.c | 39 ++++++++-------------------------------
1 file changed, 8 insertions(+), 31 deletions(-)

diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c
index 35514e0..abfc3e6 100644
--- a/drivers/mfd/twl4030-madc.c
+++ b/drivers/mfd/twl4030-madc.c
@@ -207,25 +207,19 @@ const struct twl4030_madc_conversion_method twl4030_conversion_methods[] = {
*/
static int twl4030_madc_channel_raw_read(struct twl4030_madc_data *madc, u8 reg)
{
- u8 msb, lsb;
+ u16 val;
int ret;
/*
* For each ADC channel, we have MSB and LSB register pair. MSB address
* is always LSB address+1. reg parameter is the address of LSB register
*/
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &msb, reg + 1);
+ ret = twl_i2c_read_u16(TWL4030_MODULE_MADC, &val, reg);
if (ret) {
- dev_err(madc->dev, "unable to read MSB register 0x%X\n",
- reg + 1);
- return ret;
- }
- ret = twl_i2c_read_u8(TWL4030_MODULE_MADC, &lsb, reg);
- if (ret) {
- dev_err(madc->dev, "unable to read LSB register 0x%X\n", reg);
+ dev_err(madc->dev, "unable to read register 0x%X\n", reg);
return ret;
}

- return (int)(((msb << 8) | lsb) >> 6);
+ return (int)(val >> 6);
}

/*
@@ -574,7 +568,6 @@ static int twl4030_madc_wait_conversion_ready(struct twl4030_madc_data *madc,
int twl4030_madc_conversion(struct twl4030_madc_request *req)
{
const struct twl4030_madc_conversion_method *method;
- u8 ch_msb, ch_lsb;
int ret;

if (!req || !twl4030_madc)
@@ -590,37 +583,21 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req)
ret = -EBUSY;
goto out;
}
- ch_msb = (req->channels >> 8) & 0xff;
- ch_lsb = req->channels & 0xff;
method = &twl4030_conversion_methods[req->method];
/* Select channels to be converted */
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_msb, method->sel + 1);
+ ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels, method->sel);
if (ret) {
dev_err(twl4030_madc->dev,
- "unable to write sel register 0x%X\n", method->sel + 1);
- goto out;
- }
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC, ch_lsb, method->sel);
- if (ret) {
- dev_err(twl4030_madc->dev,
- "unable to write sel register 0x%X\n", method->sel + 1);
+ "unable to write sel register 0x%X\n", method->sel);
goto out;
}
/* Select averaging for all channels if do_avg is set */
if (req->do_avg) {
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
- ch_msb, method->avg + 1);
+ ret = twl_i2c_write_u16(TWL4030_MODULE_MADC, req->channels,
+ method->avg);
if (ret) {
dev_err(twl4030_madc->dev,
"unable to write avg register 0x%X\n",
- method->avg + 1);
- goto out;
- }
- ret = twl_i2c_write_u8(TWL4030_MODULE_MADC,
- ch_lsb, method->avg);
- if (ret) {
- dev_err(twl4030_madc->dev,
- "unable to write avg reg 0x%X\n",
method->avg);
goto out;
}
--
1.9.0


\
 
 \ /
  Last update: 2014-03-01 21:21    [W:0.276 / U:0.392 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site