lkml.org 
[lkml]   [2014]   [Feb]   [7]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] Adding basic support for the INet-97F_Rev_02 board
Hi David,

Thanks for the patch, I've added it to my sunxi-devel tree.

It seems this has been missed by Maxime, because you did not send it directly
to him. Can you please rebase it one 3.14-rc1, and then send it directly to
Maxime Ripard, with the relevant mailinglists in the CC?

Thanks & Regards,

Hans


On 01/23/2014 08:38 PM, David Lanzendörfer wrote:
> This patch adds basic support for the INet-97F_Rev_02 board found in various
> low cost consumer tablet devices (http://linux-sunxi.org/INet-97F_Rev_02)
>
> Signed-off-by: David Lanzendörfer <david.lanzendoerfer@o2s.ch>
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/sun4i-a10-inet97fv2.dts | 106
> ++++++++++++++++++++++++++++++
> 2 files changed, 107 insertions(+)
> create mode 100644 arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index b663ed7..57ec008 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -253,6 +253,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \
> sun4i-a10-cubieboard.dtb \
> sun4i-a10-mini-xplus.dtb \
> sun4i-a10-hackberry.dtb \
> + sun4i-a10-inet97fv2.dtb \
> sun5i-a10s-olinuxino-micro.dtb \
> sun5i-a13-olinuxino.dtb \
> sun5i-a13-olinuxino-micro.dtb \
> diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
> b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
> new file mode 100644
> index 0000000..82b4306
> --- /dev/null
> +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts
> @@ -0,0 +1,106 @@
> +/*
> + * Copyright 2014 Open Source Support GmbH
> + *
> + * David Lanzendörfer <david.lanzendoerfer@o2s.ch>
> + *
> + * The code contained herein is licensed under the GNU General Public
> + * License. You may obtain a copy of the GNU General Public License
> + * Version 2 or later at the following locations:
> + *
> + * http://www.opensource.org/licenses/gpl-license.html
> + * http://www.gnu.org/copyleft/gpl.html
> + */
> +
> +/dts-v1/;
> +/include/ "sun4i-a10.dtsi"
> +
> +/ {
> + model = "INet-97F Rev 02";
> + compatible = "primux,inet97fv2", "allwinner,sun4i-a10";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + soc@01c00000 {
> + mmc0: mmc@01c0f000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&mmc0_pins_a>;
> + pinctrl-1 = <&mmc0_cd_pin_inet97fv2>;
> + cd-gpios = <&pio 7 1 0>; /* PH1 */
> + cd-mode = <1>;
> + status = "okay";
> + };
> +
> + pinctrl@01c20800 {
> + mmc0_cd_pin_inet97fv2: mmc0_cd_pin@0 {
> + allwinner,pins = "PH1";
> + allwinner,function = "gpio_in";
> + allwinner,drive = <0>;
> + allwinner,pull = <0>;
> + };
> +
> + usb1_vbus_pin: usb1_vbus_pin@0 {
> + allwinner,pins = "PH6";
> + allwinner,function = "gpio_out";
> + allwinner,drive = <0>;
> + allwinner,pull = <2>;
> + };
> +
> + usb2_vbus_pin: usb2_vbus_pin@0 {
> + allwinner,pins = "PH3";
> + allwinner,function = "gpio_out";
> + allwinner,drive = <0>;
> + allwinner,pull = <2>;
> + };
> + };
> +
> + uart0: serial@01c28000 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart0_pins_a>;
> + status = "okay";
> + };
> +
> + i2c0: i2c@01c2ac00 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c0_pins_a>;
> + status = "okay";
> + };
> +
> + ehci0: ehci0@0x01c14000 {
> + vbus-supply = <&reg_usb1_vbus>;
> + status = "okay";
> + };
> +
> + ehci1: ehci1@0x01c1c000 {
> + vbus-supply = <&reg_usb2_vbus>;
> + status = "okay";
> + };
> + };
> +
> + regulators {
> + compatible = "simple-bus";
> +
> + reg_usb1_vbus: usb1-vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb1_vbus_pin>;
> + regulator-name = "usb1-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + gpio = <&pio 7 6 0>;
> + };
> +
> + reg_usb2_vbus: usb2-vbus {
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb2_vbus_pin>;
> + regulator-name = "usb2-vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + enable-active-high;
> + gpio = <&pio 7 3 0>;
> + };
> + };
> +};
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/

\
 
 \ /
  Last update: 2014-02-07 15:41    [W:0.182 / U:0.016 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site