lkml.org 
[lkml]   [2014]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH] net: asix: fix bad header length bug
On Thu, Feb 06, 2014 at 03:28:13PM +0000, David Laight wrote:
> From: Igor Gnatenko
> > On Thu, 2014-02-06 at 13:56 +0100, Emil Goode wrote:
> > > The AX88772B occasionally send rx packets that cross urb boundaries
> > > and the remaining partial packet is sent with no header.
> > > When the buffer with a partial packet is of less number of octets
> > > than the value of hard_header_len the buffer is discarded by the
> > > usbnet module. This is causing dropped packages and error messages
> > > in dmesg.
> > >
> > > This can be reproduced by using ping with a packet size
> > > between 1965-1976.
> > >
> > > The bug has been reported here:
> > >
> > > https://bugzilla.kernel.org/show_bug.cgi?id=29082
> > >
> > > Signed-off-by: Emil Goode <emilgoode@gmail.com>
> > Reported-and-tested-by: Igor Gnatenko <i.gnatenko.brain@gmail.com>
> > > ---
> > > drivers/net/usb/asix_devices.c | 1 +
> > > 1 file changed, 1 insertion(+)
> > >
> > > diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
> > > index 9765a7d..120bb29 100644
> > > --- a/drivers/net/usb/asix_devices.c
> > > +++ b/drivers/net/usb/asix_devices.c
> > > @@ -455,6 +455,7 @@ static int ax88772_bind(struct usbnet *dev, struct usb_interface *intf)
> > > dev->net->ethtool_ops = &ax88772_ethtool_ops;
> > > dev->net->needed_headroom = 4; /* cf asix_tx_fixup() */
> > > dev->net->needed_tailroom = 4; /* cf asix_tx_fixup() */
> > > + dev->net->hard_header_len = 0; /* Partial packets have no header */
>
> That is the wrong place for the fix.
>
> It should only be done when rx_urb_size is set to a multiple of the usb
> packet size.
> That is only done for some of the supported devices.
>
> In fact, if the rx_urb_size is a multiple of the usb frame size (or 1k)
> then maybe the usbnet code should assume that the driver is capable
> of processing ethernet frames that cross usb packet boundaries and
> not delete short packets at all - regardless of the hard_header_len.
>
> David
>

I will do some more digging in the code, but the test of skb->len
against hard_header_len is done already in the completion callback
function passed to usb_fill_bulk_urb so it seems that buffers of less
than hard_header_len number of octets will be dropped regardless.

Best regards,

Emil Goode


\
 
 \ /
  Last update: 2014-02-07 00:21    [W:0.060 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site