lkml.org 
[lkml]   [2014]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 1/2] spi: qup: Add device tree bindings information
Date
From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

The Qualcomm Universal Peripheral (QUP) core is an
AHB slave that provides a common data path (an output
FIFO and an input FIFO) for serial peripheral interface
(SPI) mini-core.

Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
---
.../devicetree/bindings/spi/qcom,spi-qup.txt | 86 ++++++++++++++++++++
1 file changed, 86 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/qcom,spi-qup.txt

diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
new file mode 100644
index 0000000..74565f1
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
@@ -0,0 +1,86 @@
+Qualcomm Universal Peripheral (QUP) Serial Peripheral Interface (SPI)
+
+The QUP core is an AHB slave that provides a common data path (an output FIFO
+and an input FIFO) for serial peripheral interface (SPI) mini-core.
+
+SPI in master mode support up to 50MHz, up to four chip selects, and a
+programmable data path from 4 bits to 32 bits; supports numerous protocol
+variants.
+
+Required properties:
+- compatible: Should contain "qcom,spi-qup-v2".
+- reg: Should contain base register location and length
+- interrupts: Interrupt number used by this controller
+
+- clocks: Should contain the core clock and the AHB clock.
+- clock-names: Should be "core" for the core clock and "iface" for the
+ AHB clock.
+
+- #address-cells: Number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: Should be zero.
+
+Optional properties:
+- spi-max-frequency: Specifies maximum SPI clock frequency, Units - Hz. Definition
+ as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+SPI slave nodes must be children of the SPI master node and can
+contain properties described in Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ spi_8: spi@f9964000 { /* BLSP2 QUP2 */
+
+ compatible = "qcom,spi-qup-v2";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xf9964000 0x1000>;
+ interrupts = <0 102 0>;
+ spi-max-frequency = <19200000>;
+
+ clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
+ clock-names = "core", "iface";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi8_default>;
+
+ device@0 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ };
+
+ device@1 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <1>; /* Chip select 1 */
+ spi-max-frequency = <9600000>;
+ spi-cpha;
+ };
+
+ device@2 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <2>; /* Chip select 2 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ spi-cpha;
+ };
+
+ device@3 {
+ compatible = "arm,pl022-dummy";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <3>; /* Chip select 3 */
+ spi-max-frequency = <19200000>;
+ spi-cpol;
+ spi-cpha;
+ spi-cs-high;
+ };
+ };
+
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-06 18:41    [W:0.149 / U:0.300 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site