lkml.org 
[lkml]   [2014]   [Feb]   [6]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [RFC PATCH] gpiolib: make gpiod_direction_output take a logical value, add gpiod_direction_output_raw
From
Date
Hi Linus,

Am Sonntag, den 12.01.2014, 16:44 +0900 schrieb Alexandre Courbot:
> Hi Philipp,
>
> On Tue, Jan 7, 2014 at 8:34 PM, Philipp Zabel <p.zabel@pengutronix.de> wrote:
> > The documentation was not clear about whether gpio_direction_output should take
> > a logical value or the physical level on the output line, i.e. whether the
> > ACTIVE_LOW status would be taken into account.
> > This converts gpiod_direction_output to use the logical level and adds a new
> > gpiod_direction_output_raw for the raw value.
>
> Thanks for taking the time to craft this! The patch seems to do
> exactly what we discussed and looks good to me. Maybe Linus can let us
> know what he thinks about it? Unless there are reasons against it, I
> think this should be merged ASAP as we want to gpiod API to converge
> to something stable ASAP.
>
> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>

could you have a look at this patch?

thanks
Philipp

> > Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> > ---
> > Documentation/gpio/consumer.txt | 1 +
> > drivers/gpio/gpiolib.c | 67 +++++++++++++++++++++++++++++------------
> > include/asm-generic/gpio.h | 2 +-
> > include/linux/gpio/consumer.h | 7 +++++
> > 4 files changed, 57 insertions(+), 20 deletions(-)
> >
> > diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt
> > index 07c74a3..4dc4809 100644
> > --- a/Documentation/gpio/consumer.txt
> > +++ b/Documentation/gpio/consumer.txt
> > @@ -150,6 +150,7 @@ raw line value:
> > void gpiod_set_raw_value(struct gpio_desc *desc, int value)
> > int gpiod_get_raw_value_cansleep(const struct gpio_desc *desc)
> > void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
> > + int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
> >
> > The active-low state of a GPIO can also be queried using the following call:
> >
> > diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
> > index 85f772c..f04f1e6 100644
> > --- a/drivers/gpio/gpiolib.c
> > +++ b/drivers/gpio/gpiolib.c
> > @@ -330,9 +330,9 @@ static ssize_t gpio_direction_store(struct device *dev,
> > if (!test_bit(FLAG_EXPORT, &desc->flags))
> > status = -EIO;
> > else if (sysfs_streq(buf, "high"))
> > - status = gpiod_direction_output(desc, 1);
> > + status = gpiod_direction_output_raw(desc, 1);
> > else if (sysfs_streq(buf, "out") || sysfs_streq(buf, "low"))
> > - status = gpiod_direction_output(desc, 0);
> > + status = gpiod_direction_output_raw(desc, 0);
> > else if (sysfs_streq(buf, "in"))
> > status = gpiod_direction_input(desc);
> > else
> > @@ -1579,7 +1579,7 @@ int gpio_request_one(unsigned gpio, unsigned long flags, const char *label)
> > if (flags & GPIOF_DIR_IN)
> > err = gpiod_direction_input(desc);
> > else
> > - err = gpiod_direction_output(desc,
> > + err = gpiod_direction_output_raw(desc,
> > (flags & GPIOF_INIT_HIGH) ? 1 : 0);
> >
> > if (err)
> > @@ -1744,28 +1744,13 @@ fail:
> > }
> > EXPORT_SYMBOL_GPL(gpiod_direction_input);
> >
> > -/**
> > - * gpiod_direction_output - set the GPIO direction to input
> > - * @desc: GPIO to set to output
> > - * @value: initial output value of the GPIO
> > - *
> > - * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
> > - * be called safely on it. The initial value of the output must be specified.
> > - *
> > - * Return 0 in case of success, else an error code.
> > - */
> > -int gpiod_direction_output(struct gpio_desc *desc, int value)
> > +static int _gpiod_direction_output_raw(struct gpio_desc *desc, int value)
> > {
> > unsigned long flags;
> > struct gpio_chip *chip;
> > int status = -EINVAL;
> > int offset;
> >
> > - if (!desc || !desc->chip) {
> > - pr_warn("%s: invalid GPIO\n", __func__);
> > - return -EINVAL;
> > - }
> > -
> > /* GPIOs used for IRQs shall not be set as output */
> > if (test_bit(FLAG_USED_AS_IRQ, &desc->flags)) {
> > gpiod_err(desc,
> > @@ -1827,6 +1812,50 @@ fail:
> > gpiod_dbg(desc, "%s: gpio status %d\n", __func__, status);
> > return status;
> > }
> > +
> > +/**
> > + * gpiod_direction_output_raw - set the GPIO direction to output
> > + * @desc: GPIO to set to output
> > + * @value: initial output value of the GPIO
> > + *
> > + * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
> > + * be called safely on it. The initial value of the output must be specified
> > + * as raw value on the physical line without regard for the ACTIVE_LOW status.
> > + *
> > + * Return 0 in case of success, else an error code.
> > + */
> > +int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
> > +{
> > + if (!desc || !desc->chip) {
> > + pr_warn("%s: invalid GPIO\n", __func__);
> > + return -EINVAL;
> > + }
> > + return _gpiod_direction_output_raw(desc, value);
> > +}
> > +EXPORT_SYMBOL_GPL(gpiod_direction_output_raw);
> > +
> > +/**
> > + * gpiod_direction_output - set the GPIO direction to input
> > + * @desc: GPIO to set to output
> > + * @value: initial output value of the GPIO
> > + *
> > + * Set the direction of the passed GPIO to output, such as gpiod_set_value() can
> > + * be called safely on it. The initial value of the output must be specified
> > + * as the logical value of the GPIO, i.e. taking its ACTIVE_LOW status into
> > + * account.
> > + *
> > + * Return 0 in case of success, else an error code.
> > + */
> > +int gpiod_direction_output(struct gpio_desc *desc, int value)
> > +{
> > + if (!desc || !desc->chip) {
> > + pr_warn("%s: invalid GPIO\n", __func__);
> > + return -EINVAL;
> > + }
> > + if (test_bit(FLAG_ACTIVE_LOW, &desc->flags))
> > + value = !value;
> > + return _gpiod_direction_output_raw(desc, value);
> > +}
> > EXPORT_SYMBOL_GPL(gpiod_direction_output);
> >
> > /**
> > diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
> > index a5f56a0..23e3645 100644
> > --- a/include/asm-generic/gpio.h
> > +++ b/include/asm-generic/gpio.h
> > @@ -69,7 +69,7 @@ static inline int gpio_direction_input(unsigned gpio)
> > }
> > static inline int gpio_direction_output(unsigned gpio, int value)
> > {
> > - return gpiod_direction_output(gpio_to_desc(gpio), value);
> > + return gpiod_direction_output_raw(gpio_to_desc(gpio), value);
> > }
> >
> > static inline int gpio_set_debounce(unsigned gpio, unsigned debounce)
> > diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
> > index 4d34dbb..3879943 100644
> > --- a/include/linux/gpio/consumer.h
> > +++ b/include/linux/gpio/consumer.h
> > @@ -36,6 +36,7 @@ void devm_gpiod_put(struct device *dev, struct gpio_desc *desc);
> > int gpiod_get_direction(const struct gpio_desc *desc);
> > int gpiod_direction_input(struct gpio_desc *desc);
> > int gpiod_direction_output(struct gpio_desc *desc, int value);
> > +int gpiod_direction_output_raw(struct gpio_desc *desc, int value);
> >
> > /* Value get/set from non-sleeping context */
> > int gpiod_get_value(const struct gpio_desc *desc);
> > @@ -121,6 +122,12 @@ static inline int gpiod_direction_output(struct gpio_desc *desc, int value)
> > WARN_ON(1);
> > return -ENOSYS;
> > }
> > +static inline int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
> > +{
> > + /* GPIO can never have been requested */
> > + WARN_ON(1);
> > + return -ENOSYS;
> > +}
> >
> >
> > static inline int gpiod_get_value(const struct gpio_desc *desc)
> > --
> > 1.8.5.2
> >
>




\
 
 \ /
  Last update: 2014-02-06 17:41    [W:2.370 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site