lkml.org 
[lkml]   [2014]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] ARM: OMAP2+: Add support for thumb mode on DT booted N900
On Wed, Feb 05, 2014 at 09:42:30PM +0100, Pali Rohár wrote:
> 2014-02-05 Sebastian Reichel <sre@debian.org>:
> > Hi,
> >
> > On Wed, Feb 05, 2014 at 05:38:54PM +0100, Pali Rohár wrote:
> >> > I assumed, that the workaround is not needed for this device type.
> >>
> >> That rx51 secure call must not be called on non secure devices (e.g.
> >> qemu), because it cause kernel crash. So I thought that kernel should
> >> write something like secure call is disabled on that device types.
> >> Kernel code for errata 430973 will update ibe bit for non secure
> >> devices.
> >
> > Do you see any advantage in having that message?
> >
>
> Consistency. Print message 1) only if secure rx51 smc instruction is
> called or 2) print message always (also if smc is not called). With
> that patch message is printed (enabled/disabled) only if device is
> rx51 and device type is HS.
>
> For information it is also good to know that in qemu that special
> secure smc instruction was not called.

Assuming I do not know about this errata/workaround and have some
problems with crashing binaries I may have a look at the kernel
warnings. Without the additional message I won't get any hint about
the errata/workaround at all.

On the other hand there is no such information gain on qemu. It just
tells the user, that some workaround, which is not needed, has not
been activated.

-- Sebastian
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-02-06 02:21    [W:0.039 / U:2.844 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site