lkml.org 
[lkml]   [2014]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH RESEND] ARM: dts: add BeagleBone Audio Cape (Rev A) dtsi
On 02/05/2014 07:48 AM, Jack Mitchell wrote:
> From: Jack Mitchell <jack@embed.me.uk>
>
> Devicetree include file for setting up the am335x mcasp bus, i2c-2
> bus, and audio codec required for a functioning BeagleBone Audio Cape.
>
> Signed-off-by: Jack Mitchell <jack@embed.me.uk>
> Signed-off-by: Matt Porter <mporter@linaro.org>
> ---
> arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi | 124 +++++++++++++++++++++
> arch/arm/boot/dts/am335x-bone-common.dtsi | 14 +++
> 2 files changed, 138 insertions(+)
> create mode 100644 arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi
>
> diff --git a/arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi b/arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi
> new file mode 100644
> index 0000000..b8ec3dc
> --- /dev/null
> +++ b/arch/arm/boot/dts/am335x-bone-audio-cape-reva.dtsi
> @@ -0,0 +1,124 @@
> +/*
> + * Copyright (C) 2014 Jack Mitchell <jack@embed.me.uk>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * In order to enable the BeagleBone Audio Cape this dtsi must be
> + * incuded in the top level dts. On BeagleBone Black hardware the
> + * status of the HDMI dts node must also be set to "disabled".
> + *
> + * --- a/arch/arm/boot/dts/am335x-bone.dts
> + * +++ b/arch/arm/boot/dts/am335x-bone.dts
> + * @@ -9,6 +9,7 @@
> + *
> + * #include "am33xx.dtsi"
> + * #include "am335x-bone-common.dtsi"
> + * +#include "am335x-bone-audio-cape-reva.dtsi"
> + *
> + * &ldo3_reg {
> + * regulator-min-microvolt = <1800000>;
> + *
> + * On BeagleBone Black hardware the status of the HDMI dts node must
> + * also be set to "disabled"
> + *
> + * --- a/arch/arm/boot/dts/am335x-boneblack.dts
> + * +++ b/arch/arm/boot/dts/am335x-boneblack.dts
> + * @@ -73,6 +74,6 @@
> + * pinctrl-names = "default", "off";
> + * pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
> + * pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
> + * - status = "okay";
> + * + status = "disabled";
> + * };
> + * };
> + */
> +
how about making the audio-cape-reva.dts which includes and overrides
parameters of boneblack.dts?


Further, I see a bunch of capes in
http://elinux.org/Beagleboard:BeagleBone_Capes

Assuming that we dont want to discuss capebus all over again, is this
the approach we'd like to consider in the interim?

> +/ {
> + sound {
> + compatible = "ti,da830-evm-audio";
> + ti,model = "AM335x BeagleBone Audio Cape Rev. A";
> + ti,audio-codec = <&tlv320aic3106>;
> + ti,mcasp-controller = <&mcasp0>;
> + ti,codec-clock-rate = <12000000>;
> + ti,audio-routing =
> + "Headphone Jack", "HPLOUT",
> + "Headphone Jack", "HPROUT",
> + "LINE1L", "Line In",
> + "LINE1R", "Line In";
> + };
> +
> + audio-cape-gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "default";
> + pinctrl-0 = <&bone_audio_cape_led_pins>;
> +
> + audio-led0 {
> + label = "audio:green:usr0";
> + gpios = <&gpio1 18 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + default-state = "off";
> + };
> +
> + audio-led1 {
> + label = "audio:green:usr1";
> + gpios = <&gpio1 19 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "mmc0";
> + default-state = "off";
> + };
> + };
> +};
> +
> +&am33xx_pinmux {
> + bone_audio_cape_led_pins: pinmux_bone_audio_cape_led_pins {
> + pinctrl-single,pins = <
> + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a2.gpio1_18 */
> + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a3.gpio1_19 */
> + >;
> + };
> +
> + bone_audio_cape_pins: bone_audio_cape_pins {
> + pinctrl-single,pins = <
> + 0x190 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
> + 0x194 (PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
> + 0x19c (PIN_INPUT_PULLUP | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */
> + 0x1ac (PIN_INPUT_PULLUP | MUX_MODE2) /* mcasp0_ahclkx.mcasp0_axr3 */
> + >;
> + };
> +};
> +
> +&i2c2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c2_pins>;
> +
> + status = "okay";
> + clock-frequency = <100000>;
> +
> + tlv320aic3106: tlv320aic3106@1b {
> + compatible = "ti,tlv320aic3106";
> + reg = <0x1b>;
> + status = "okay";
> +
> + /* Regulators */
> + AVDD-supply = <&vmmcsd_fixed>;
> + IOVDD-supply = <&vmmcsd_fixed>;
> + DRVDD-supply = <&vmmcsd_fixed>;
> + DVDD-supply = <&vdd1v8_fixed>;
> + };
> +};
> +
> +&mcasp0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&bone_audio_cape_pins>;
> +
> + status = "okay";
> +
> + op-mode = <0>; /* MCASP_IIS_MODE */
> + tdm-slots = <2>;
> + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
> + 0 0 2 1
> + >;
> + tx-num-evt = <1>;
> + rx-num-evt = <1>;
> +};
> diff --git a/arch/arm/boot/dts/am335x-bone-common.dtsi b/arch/arm/boot/dts/am335x-bone-common.dtsi
> index e3f27ec..c1c0f74 100644
> --- a/arch/arm/boot/dts/am335x-bone-common.dtsi
> +++ b/arch/arm/boot/dts/am335x-bone-common.dtsi
> @@ -62,12 +62,26 @@
> regulator-min-microvolt = <3300000>;
> regulator-max-microvolt = <3300000>;
> };
> +
> + vdd1v8_fixed: fixedregulator@1 {
> + compatible = "regulator-fixed";
> + regulator-name = "vdd1v8_fixed";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> };
>
> &am33xx_pinmux {
> pinctrl-names = "default";
> pinctrl-0 = <&clkout2_pin>;
>
> + i2c2_pins: pinmux_i2c2_pins {
> + pinctrl-single,pins = <
> + 0x178 (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
> + 0x17c (PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
> + >;
> + };
> +
> user_leds_s0: user_leds_s0 {
> pinctrl-single,pins = <
> 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
>


--
Regards,
Nishanth Menon


\
 
 \ /
  Last update: 2014-02-05 16:01    [W:0.087 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site