lkml.org 
[lkml]   [2014]   [Feb]   [5]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v4 1/2] iio:as3935: Add DT binding docs for AS3935 driver
From
Date


On February 5, 2014 10:22:24 AM GMT+00:00, Matt Ranostay <mranostay@gmail.com> wrote:
>On Tue, Feb 4, 2014 at 11:24 PM, Jonathan Cameron <jic23@kernel.org>
>wrote:
>>
>>
>> On February 5, 2014 4:43:35 AM GMT+00:00, Matt Porter
><mporter@linaro.org> wrote:
>>>On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay
>>>wrote:
>>>> Document compatible string, required and optional DT properties for
>>>> AS3935 chipset driver.
>>>>
>>>> Signed-off-by: Matt Ranostay <mranostay@gmail.com>
>>>> ---
>>>> .../devicetree/bindings/iio/proximity/as3935.txt | 25
>>>++++++++++++++++++++++
>>>> 1 file changed, 25 insertions(+)
>>>> create mode 100644
>>>Documentation/devicetree/bindings/iio/proximity/as3935.txt
>>>>
>>>> diff --git
>>>a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>>>b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>>>> new file mode 100644
>>>> index 0000000..7e117cd
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>>>> @@ -0,0 +1,25 @@
>>>> +Austrian Microsystems AS3935 Franklin lightning sensor device
>driver
>>>> +
>>>> +Required properties:
>>>> + - compatible: must be "ams,as3935"
>>>
>>>Change this to "amstaos,as3935"
>>>
>>>amstaos (AMS bought Taos) is already a registered vendor prefix in
>>>vendor-prefixes.txt
>>
>> It is but has a rather separate presence and is not where people
>expect to find non light
>> sensor stuff from ams. I personally would go for a new vendor prefix
>and stick with ams.
>>
>
>So should I add to vendor-prefixes.txt as well? or not?
Yes. All vendor prefixes should be in there
>
>>>
>>>> + - reg: SPI chip select number for the device
>>>> + - spi-cpha: SPI Mode 1
>>>
>>>When using generic binding properties, please reference the binding
>>>being used. Like:
>>>
>>> - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic
>SPI
>>> slave node bindings.
>>>
>>>> + - interrupt-parent : should be the phandle for the interrupt
>>>controller
>>>> + - interrupts : interrupt mapping for GPIO IRQ
>>>
>>> Refer to interrupt-controller/interrupts.txt for generic
>>> interrupt client node bindings.
>>>
>>>> +
>>>> +Optional properties:
>>>> + - ams,tune-cap: Calibration tuning capacitor stepping value 0
>- 15.
>>>> + Range of 0 to 120 pF, 8pF steps. This will require using the
>>>> + calibration data from the manufacturer.
>>>> +
>>>> +
>>>> +Example:
>>>> +
>>>> +as3935@0 {
>>>> + compatible = "ams,as3935";
>>>> + reg = <0>;
>>>> + spi-cpha;
>>>> + interrupt-parent = <&gpio1>;
>>>> + interrupts = <16 1>;
>>>> + ams,tune-cap = /bits/ 8 <10>;
>>>
>>>What is this? Why not just ams,tune-cap = <10>; ?
>>>
>>>It's a value between 0-15, right?
>>>
>>>-Matt
>>>--
>>>To unsubscribe from this list: send the line "unsubscribe linux-iio"
>in
>>>the body of a message to majordomo@vger.kernel.org
>>>More majordomo info at http://vger.kernel.org/majordomo-info.html
>>
>> --
>> Sent from my Android phone with K-9 Mail. Please excuse my brevity.
>--
>To unsubscribe from this list: send the line "unsubscribe linux-iio" in
>the body of a message to majordomo@vger.kernel.org
>More majordomo info at http://vger.kernel.org/majordomo-info.html

--
Sent from my Android phone with K-9 Mail. Please excuse my brevity.


\
 
 \ /
  Last update: 2014-02-05 13:01    [W:0.261 / U:1.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site