lkml.org 
[lkml]   [2014]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 1/2] iio:as3935: Add DT binding docs for AS3935 driver
From
On Tue, Feb 4, 2014 at 8:43 PM, Matt Porter <mporter@linaro.org> wrote:
> On Tue, Feb 04, 2014 at 07:14:55PM -0800, Matt Ranostay Matt Ranostay wrote:
>> Document compatible string, required and optional DT properties for
>> AS3935 chipset driver.
>>
>> Signed-off-by: Matt Ranostay <mranostay@gmail.com>
>> ---
>> .../devicetree/bindings/iio/proximity/as3935.txt | 25 ++++++++++++++++++++++
>> 1 file changed, 25 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/iio/proximity/as3935.txt
>>
>> diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> new file mode 100644
>> index 0000000..7e117cd
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
>> @@ -0,0 +1,25 @@
>> +Austrian Microsystems AS3935 Franklin lightning sensor device driver
>> +
>> +Required properties:
>> + - compatible: must be "ams,as3935"
>
> Change this to "amstaos,as3935"
>
> amstaos (AMS bought Taos) is already a registered vendor prefix in
> vendor-prefixes.txt
>
>> + - reg: SPI chip select number for the device
>> + - spi-cpha: SPI Mode 1
>
> When using generic binding properties, please reference the binding
> being used. Like:
>
> - spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
> slave node bindings.
>
Noted.

>> + - interrupt-parent : should be the phandle for the interrupt controller
>> + - interrupts : interrupt mapping for GPIO IRQ
>
> Refer to interrupt-controller/interrupts.txt for generic
> interrupt client node bindings.
>
Noted.

>> +
>> +Optional properties:
>> + - ams,tune-cap: Calibration tuning capacitor stepping value 0 - 15.
>> + Range of 0 to 120 pF, 8pF steps. This will require using the
>> + calibration data from the manufacturer.
>> +
>> +
>> +Example:
>> +
>> +as3935@0 {
>> + compatible = "ams,as3935";
>> + reg = <0>;
>> + spi-cpha;
>> + interrupt-parent = <&gpio1>;
>> + interrupts = <16 1>;
>> + ams,tune-cap = /bits/ 8 <10>;
>
> What is this? Why not just ams,tune-cap = <10>; ?
>
> It's a value between 0-15, right?

Correct but it is using of_property_read_u8() so that requires the
/bits/ statement.
Should this just be a u32 value?

>
> -Matt


\
 
 \ /
  Last update: 2014-02-05 06:41    [W:0.107 / U:0.268 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site