lkml.org 
[lkml]   [2014]   [Feb]   [4]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] regulator: core: Make regulator object reflect configured voltage
On Tue, Feb 04, 2014 at 11:09:03AM -0800, Bjorn Andersson wrote:

> I have a regulator that's being configured from DT as:
> regulator-min-microvolt = <2950000>;
> regulator-max-microvolt = <2950000>;

> In the consumer I do regulator_set_voltage(2.95V).

> As min == max the voltage is applied by the regulator framework on registration
> of the regulator; and the regulator_set_voltage() fails as
> REGULATOR_CHANGE_VOLTAGE is not set for this regulator.

So we should be changing the code to allow a set_voltage() that sets the
voltage to the existing voltage regardless of constraints allowing a
change then - that's what the underlying issue is. Your change wouldn't
cover the case where the hardware defualt is being used for example.
[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-02-04 21:41    [W:0.061 / U:0.152 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site