lkml.org 
[lkml]   [2014]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 07/10] watchdog: xilinx: Fix OF binding
On 01/31/2014 06:33 PM, Rob Herring wrote:
> On Fri, Jan 31, 2014 at 8:18 AM, Michal Simek <michal.simek@xilinx.com> wrote:
>> Use of_property_read_u32 functions to clean OF probing.
>
> The subject is a bit misleading as this doesn't really fix anything.

fair enough. Will change it.

>
>>
>> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
>> ---
>>
>> drivers/watchdog/of_xilinx_wdt.c | 25 ++++++++++---------------
>> 1 file changed, 10 insertions(+), 15 deletions(-)
>>
>> diff --git a/drivers/watchdog/of_xilinx_wdt.c b/drivers/watchdog/of_xilinx_wdt.c
>> index c229cc4..475440a6 100644
>> --- a/drivers/watchdog/of_xilinx_wdt.c
>> +++ b/drivers/watchdog/of_xilinx_wdt.c
>> @@ -147,8 +147,7 @@ static u32 xwdt_selftest(struct xwdt_device *xdev)
>> static int xwdt_probe(struct platform_device *pdev)
>> {
>> int rc;
>> - u32 *tmptr;
>> - u32 *pfreq;
>> + u32 pfreq, enable_once;
>> struct resource *res;
>> struct xwdt_device *xdev;
>> bool no_timeout = false;
>> @@ -168,28 +167,24 @@ static int xwdt_probe(struct platform_device *pdev)
>> if (IS_ERR(xdev->base))
>> return PTR_ERR(xdev->base);
>>
>> - pfreq = (u32 *)of_get_property(pdev->dev.of_node,
>> - "clock-frequency", NULL);
>> -
>> - if (pfreq == NULL) {
>> + rc = of_property_read_u32(pdev->dev.of_node, "clock-frequency", &pfreq);
>> + if (rc) {
>> dev_warn(&pdev->dev,
>> "The watchdog clock frequency cannot be obtained\n");
>> no_timeout = true;
>
> You can kill this...
>
>> }
>>
>> - tmptr = (u32 *)of_get_property(pdev->dev.of_node,
>> - "xlnx,wdt-interval", NULL);
>> - if (tmptr == NULL) {
>> + rc = of_property_read_u32(pdev->dev.of_node, "xlnx,wdt-interval",
>> + &xdev->wdt_interval);
>> + if (rc) {
>> dev_warn(&pdev->dev,
>> "Parameter \"xlnx,wdt-interval\" not found\n");
>> no_timeout = true;
>
> and this...
>
>> - } else {
>> - xdev->wdt_interval = *tmptr;
>> }
>>
>> - tmptr = (u32 *)of_get_property(pdev->dev.of_node,
>> - "xlnx,wdt-enable-once", NULL);
>> - if (tmptr == NULL) {
>> + rc = of_property_read_u32(pdev->dev.of_node, "xlnx,wdt-enable-once",
>> + &enable_once);
>> + if (!rc && enable_once) {
>> dev_warn(&pdev->dev,
>> "Parameter \"xlnx,wdt-enable-once\" not found\n");
>> watchdog_set_nowayout(xilinx_wdt_wdd, true);
>> @@ -201,7 +196,7 @@ static int xwdt_probe(struct platform_device *pdev)
>> */
>> if (!no_timeout)
>
> and use "if (pfreq && xdev->wdt_interval)" if you initialize pfreq to 0.


I just wanted to to change functions not logic in the driver.
But it can be changed too.

>> xilinx_wdt_wdd->timeout = 2 * ((1 << xdev->wdt_interval) /
>> - *pfreq);
>> + pfreq);
>
> Is the wdog really usable if the timeout properties are missing? Seems
> like you should fail to probe rather than warn.

There are 2 things.
1. timeout - you don't need pfreq and wdt_interval to use this driver
but for that there should be module parameter timeout there.
It should be added.

2. about warn - based on 1 I don't think driver should failed
but I am looking at logic above which I have added there but should be different.

u32 enable_once = 0;
if (!rc)
dev_warn

if (enable_once)
watchdog_set_nowayout(xilinx_wdt_wdd, true);

Thanks,
Michal

--
Michal Simek, Ing. (M.Eng), OpenPGP -> KeyID: FE3D1F91
w: www.monstr.eu p: +42-0-721842854
Maintainer of Linux kernel - Microblaze cpu - http://www.monstr.eu/fdt/
Maintainer of Linux kernel - Xilinx Zynq ARM architecture
Microblaze U-BOOT custodian and responsible for u-boot arm zynq platform


[unhandled content-type:application/pgp-signature]
\
 
 \ /
  Last update: 2014-02-03 09:21    [W:0.086 / U:0.772 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site