lkml.org 
[lkml]   [2014]   [Feb]   [3]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 04/11] HID: logitech-dj: remove hidinput_input_event
From
On Mon, Feb 3, 2014 at 11:06 AM, David Herrmann <dh.herrmann@gmail.com> wrote:
> Hi
>
> On Sun, Feb 2, 2014 at 5:50 AM, Benjamin Tissoires
> <benjamin.tissoires@redhat.com> wrote:
>> hid-logitech-dj uses its own ->hidinput_input_event() instead of
>> the generic binding in hid-input.
>> Moving the handling of LEDs towards logi_dj_output_hidraw_report()
>> allows two things:
>> - remove hidinput_input_event in struct hid_device
>> - hidraw user space programs can also set the LEDs
>>
>> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
>> ---
>> drivers/hid/hid-logitech-dj.c | 99 +++++++++++++++----------------------------
>> 1 file changed, 35 insertions(+), 64 deletions(-)
>>
>> diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c
>> index f45279c..61d2bbf 100644
>> --- a/drivers/hid/hid-logitech-dj.c
>> +++ b/drivers/hid/hid-logitech-dj.c
>> @@ -44,14 +44,6 @@ static const char kbd_descriptor[] = {
>> 0x19, 0xE0, /* USAGE_MINIMUM (Left Control) */
>> 0x29, 0xE7, /* USAGE_MAXIMUM (Right GUI) */
>> 0x81, 0x02, /* INPUT (Data,Var,Abs) */
>> - 0x95, 0x05, /* REPORT COUNT (5) */
>> - 0x05, 0x08, /* USAGE PAGE (LED page) */
>> - 0x19, 0x01, /* USAGE MINIMUM (1) */
>> - 0x29, 0x05, /* USAGE MAXIMUM (5) */
>> - 0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */
>> - 0x95, 0x01, /* REPORT COUNT (1) */
>> - 0x75, 0x03, /* REPORT SIZE (3) */
>> - 0x91, 0x01, /* OUTPUT (Constant) */
>> 0x95, 0x06, /* REPORT_COUNT (6) */
>> 0x75, 0x08, /* REPORT_SIZE (8) */
>> 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
>> @@ -60,6 +52,18 @@ static const char kbd_descriptor[] = {
>> 0x19, 0x00, /* USAGE_MINIMUM (no event) */
>> 0x2A, 0xFF, 0x00, /* USAGE_MAXIMUM (reserved) */
>> 0x81, 0x00, /* INPUT (Data,Ary,Abs) */
>> + 0x85, 0x0e, /* REPORT_ID (14) */
>> + 0x05, 0x08, /* USAGE PAGE (LED page) */
>> + 0x95, 0x05, /* REPORT COUNT (5) */
>> + 0x75, 0x01, /* REPORT SIZE (1) */
>> + 0x15, 0x00, /* LOGICAL_MINIMUM (0) */
>> + 0x25, 0x01, /* LOGICAL_MAXIMUM (1) */
>> + 0x19, 0x01, /* USAGE MINIMUM (1) */
>> + 0x29, 0x05, /* USAGE MAXIMUM (5) */
>> + 0x91, 0x02, /* OUTPUT (Data, Variable, Absolute) */
>> + 0x95, 0x01, /* REPORT COUNT (1) */
>> + 0x75, 0x03, /* REPORT SIZE (3) */
>> + 0x91, 0x01, /* OUTPUT (Constant) */
>> 0xC0
>> };
>>
>> @@ -544,10 +548,30 @@ static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf,
>> size_t count,
>> unsigned char report_type)
>> {
>> - /* Called by hid raw to send data */
>> - dbg_hid("%s\n", __func__);
>> + struct dj_device *djdev = hid->driver_data;
>> + struct dj_receiver_dev *djrcv_dev = djdev->dj_receiver_dev;
>> + u8 *out_buf;
>> + int ret;
>>
>> - return 0;
>> + if (buf[0] != REPORT_TYPE_LEDS)
>> + return -EINVAL;
>> +
>> + out_buf = kzalloc(DJREPORT_SHORT_LENGTH, GFP_ATOMIC);
>> + if (!out_buf)
>> + return -ENOMEM;
>> +
>> + if (count < DJREPORT_SHORT_LENGTH - 2)
>> + count = DJREPORT_SHORT_LENGTH - 2;
>> +
>> + out_buf[0] = REPORT_ID_DJ_SHORT;
>> + out_buf[1] = djdev->device_index;
>> + memcpy(out_buf + 2, buf, count);
>> +
>> + ret = djrcv_dev->hdev->hid_output_raw_report(djrcv_dev->hdev, out_buf,
>> + DJREPORT_SHORT_LENGTH, report_type);
>
> Strictly speaking the code below uses HID_REQ_SET_REPORT and you
> replace it with hid_output_raw_report() here (which at least for BTHID
> is not equivalent). Anyhow, HID-core uses hid_output_raw_report(),
> too, so this should be fine.

Yes, you are right. This fires back on me yesterday when I tried to
remove the hid_output_raw_report() calls.
It occurs it works because usbhid_out_raw_report() uses set_report
when there is no urbout, which is the case with logitech receivers.
So I guess an ideal solution would be to implement a hid_hw_request call.

However, the only concern I have with hid_hw_request is that it does
not allow hidraw to play with the LEDs given that hidraw does not have
an ioctl for SET_REPORT (or GET_REPORT). I already seen this issue
regarding i2c_hid at some point, but it was "solved" in i2c_hid by
using the same ugly trick that we have in USB-hid.

Cheers,
Benjamin

>
> Thanks
> David
>
>> +
>> + kfree(out_buf);
>> + return ret;
>> }
>>
>> static void rdcat(char *rdesc, unsigned int *rsize, const char *data, unsigned int size)
>> @@ -613,58 +637,6 @@ static int logi_dj_ll_parse(struct hid_device *hid)
>> return retval;
>> }
>>
>> -static int logi_dj_ll_input_event(struct input_dev *dev, unsigned int type,
>> - unsigned int code, int value)
>> -{
>> - /* Sent by the input layer to handle leds and Force Feedback */
>> - struct hid_device *dj_hiddev = input_get_drvdata(dev);
>> - struct dj_device *dj_dev = dj_hiddev->driver_data;
>> -
>> - struct dj_receiver_dev *djrcv_dev =
>> - dev_get_drvdata(dj_hiddev->dev.parent);
>> - struct hid_device *dj_rcv_hiddev = djrcv_dev->hdev;
>> - struct hid_report_enum *output_report_enum;
>> -
>> - struct hid_field *field;
>> - struct hid_report *report;
>> - unsigned char *data;
>> - int offset;
>> -
>> - dbg_hid("%s: %s, type:%d | code:%d | value:%d\n",
>> - __func__, dev->phys, type, code, value);
>> -
>> - if (type != EV_LED)
>> - return -1;
>> -
>> - offset = hidinput_find_field(dj_hiddev, type, code, &field);
>> -
>> - if (offset == -1) {
>> - dev_warn(&dev->dev, "event field not found\n");
>> - return -1;
>> - }
>> - hid_set_field(field, offset, value);
>> -
>> - data = hid_alloc_report_buf(field->report, GFP_ATOMIC);
>> - if (!data) {
>> - dev_warn(&dev->dev, "failed to allocate report buf memory\n");
>> - return -1;
>> - }
>> -
>> - hid_output_report(field->report, &data[0]);
>> -
>> - output_report_enum = &dj_rcv_hiddev->report_enum[HID_OUTPUT_REPORT];
>> - report = output_report_enum->report_id_hash[REPORT_ID_DJ_SHORT];
>> - hid_set_field(report->field[0], 0, dj_dev->device_index);
>> - hid_set_field(report->field[0], 1, REPORT_TYPE_LEDS);
>> - hid_set_field(report->field[0], 2, data[1]);
>> -
>> - hid_hw_request(dj_rcv_hiddev, report, HID_REQ_SET_REPORT);
>> -
>> - kfree(data);
>> -
>> - return 0;
>> -}
>> -
>> static int logi_dj_ll_start(struct hid_device *hid)
>> {
>> dbg_hid("%s\n", __func__);
>> @@ -683,7 +655,6 @@ static struct hid_ll_driver logi_dj_ll_driver = {
>> .stop = logi_dj_ll_stop,
>> .open = logi_dj_ll_open,
>> .close = logi_dj_ll_close,
>> - .hidinput_input_event = logi_dj_ll_input_event,
>> };
>>
>>
>> --
>> 1.8.3.1
>>


\
 
 \ /
  Last update: 2014-02-03 18:01    [W:0.066 / U:0.176 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site