lkml.org 
[lkml]   [2014]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 5/5] ARM: dts: AM33XX: Add ecap interrupt properties
* Matt Porter <mporter@linaro.org> [140129 13:02]:
> Add missing interrupt properties to the ecap0, ecap1, and ecap2
> nodes.
>
> Signed-off-by: Matt Porter <mporter@linaro.org>

Thanks taking this patch only into omap-for-v3.15/dt, the rest
should go via the driver mailing lists.

Regards,

Tony

> ---
> arch/arm/boot/dts/am33xx.dtsi | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> index 6d95d3d..b4139ba 100644
> --- a/arch/arm/boot/dts/am33xx.dtsi
> +++ b/arch/arm/boot/dts/am33xx.dtsi
> @@ -582,6 +582,8 @@
> compatible = "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48300100 0x80>;
> + interrupts = <31>;
> + interrupt-names = "ecap0";
> ti,hwmods = "ecap0";
> status = "disabled";
> };
> @@ -610,6 +612,8 @@
> compatible = "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48302100 0x80>;
> + interrupts = <47>;
> + interrupt-names = "ecap1";
> ti,hwmods = "ecap1";
> status = "disabled";
> };
> @@ -638,6 +642,8 @@
> compatible = "ti,am33xx-ecap";
> #pwm-cells = <3>;
> reg = <0x48304100 0x80>;
> + interrupts = <61>;
> + interrupt-names = "ecap2";
> ti,hwmods = "ecap2";
> status = "disabled";
> };
> --
> 1.8.4
>


\
 
 \ /
  Last update: 2014-03-01 00:21    [W:0.060 / U:0.232 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site