lkml.org 
[lkml]   [2014]   [Feb]   [28]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [RFC PATCH] mmc: core: Invoke sdio func driver's PM callbacks from the sdio bus
On 02/28/2014 07:49 PM, Ulf Hansson wrote:
> The sdio func device is added to the driver model after the card
> device.
>
> This means the sdio func device will be suspend before the card device
> and thus resumed after. The consequence are the mmc core don't
> explicity need to protect itself from receiving sdio requests in
> suspended state. Instead that can be handled from the sdio bus, which
> is thus invokes the PM callbacks instead of old dummy function.
>
> In the case were the sdio func driver don't implement the PM callbacks
> the mmc core will in the early phase of system suspend, remove the
> card from the driver model and thus power off it.
>
> Cc: Aaron Lu <aaron.lu@intel.com>
> Cc: NeilBrown <neilb@suse.de>
> Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
> ---
>
> Note, this patch has only been compile tested. Would appreciate if some with
> SDIO and a sdio func driver could help out to test this. Especially the
> libertas driver would be nice.
>
> ---
> drivers/mmc/core/sdio.c | 45 ++++---------------------------------------
> drivers/mmc/core/sdio_bus.c | 14 +-------------
> 2 files changed, 5 insertions(+), 54 deletions(-)
>
> diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c
> index 4d721c6..9933e42 100644
> --- a/drivers/mmc/core/sdio.c
> +++ b/drivers/mmc/core/sdio.c
> @@ -943,40 +943,21 @@ static int mmc_sdio_pre_suspend(struct mmc_host *host)
> */
> static int mmc_sdio_suspend(struct mmc_host *host)
> {
> - int i, err = 0;
> -
> - for (i = 0; i < host->card->sdio_funcs; i++) {
> - struct sdio_func *func = host->card->sdio_func[i];
> - if (func && sdio_func_present(func) && func->dev.driver) {
> - const struct dev_pm_ops *pmops = func->dev.driver->pm;
> - err = pmops->suspend(&func->dev);
> - if (err)
> - break;
> - }
> - }
> - while (err && --i >= 0) {
> - struct sdio_func *func = host->card->sdio_func[i];
> - if (func && sdio_func_present(func) && func->dev.driver) {
> - const struct dev_pm_ops *pmops = func->dev.driver->pm;
> - pmops->resume(&func->dev);
> - }
> - }
> -
> - if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
> + if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
> mmc_claim_host(host);
> sdio_disable_wide(host->card);
> mmc_release_host(host);
> }
>
> - if (!err && !mmc_card_keep_power(host))
> + if (!mmc_card_keep_power(host))
> mmc_power_off(host);
>
> - return err;
> + return 0;
> }
>
> static int mmc_sdio_resume(struct mmc_host *host)
> {
> - int i, err = 0;
> + int err = 0;
>
> BUG_ON(!host);
> BUG_ON(!host->card);
> @@ -1019,24 +1000,6 @@ static int mmc_sdio_resume(struct mmc_host *host)
> wake_up_process(host->sdio_irq_thread);
> mmc_release_host(host);
>
> - /*
> - * If the card looked to be the same as before suspending, then
> - * we proceed to resume all card functions. If one of them returns
> - * an error then we simply return that error to the core and the
> - * card will be redetected as new. It is the responsibility of
> - * the function driver to perform further tests with the extra
> - * knowledge it has of the card to confirm the card is indeed the
> - * same as before suspending (same MAC address for network cards,
> - * etc.) and return an error otherwise.
> - */
> - for (i = 0; !err && i < host->card->sdio_funcs; i++) {
> - struct sdio_func *func = host->card->sdio_func[i];
> - if (func && sdio_func_present(func) && func->dev.driver) {
> - const struct dev_pm_ops *pmops = func->dev.driver->pm;
> - err = pmops->resume(&func->dev);
> - }
> - }
> -
> host->pm_flags &= ~MMC_PM_KEEP_POWER;
> return err;
> }
> diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c
> index 92d1ba8..4fa8fef9 100644
> --- a/drivers/mmc/core/sdio_bus.c
> +++ b/drivers/mmc/core/sdio_bus.c
> @@ -197,20 +197,8 @@ static int sdio_bus_remove(struct device *dev)
>
> #ifdef CONFIG_PM
>
> -#ifdef CONFIG_PM_SLEEP
> -static int pm_no_operation(struct device *dev)
> -{
> - /*
> - * Prevent the PM core from calling SDIO device drivers' suspend
> - * callback routines, which it is not supposed to do, by using this
> - * empty function as the bus type suspend callaback for SDIO.
> - */
> - return 0;
> -}
> -#endif
> -
> static const struct dev_pm_ops sdio_bus_pm_ops = {
> - SET_SYSTEM_SLEEP_PM_OPS(pm_no_operation, pm_no_operation)
> + SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)

The same thing can be achieved by not defining the two callbacks here,
the PM core will use driver's callback in that case, but that is not a
big deal.

Reviewed-by: Aaron Lu <aaron.lu@intel.com>

Thanks,
Aaron

> SET_RUNTIME_PM_OPS(
> pm_generic_runtime_suspend,
> pm_generic_runtime_resume,
>



\
 
 \ /
  Last update: 2014-02-28 14:21    [W:0.253 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site