lkml.org 
[lkml]   [2014]   [Feb]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v2 09/11] ARM: shmobile: lager dts: Add MSIOF nodes
    Date
    From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

    Add pinctrl and SPI device for MSIOF on Lager.
    On this board, only MSIOF1 is in use. Its bus contains a single device
    (a Renesas R2A11302FT PMIC), for which no bindings are defined yet.

    Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
    Cc: devicetree@vger.kernel.org
    ---
    v2:
    - No changes

    arch/arm/boot/dts/r8a7790-lager.dts | 22 ++++++++++++++++++++++
    1 file changed, 22 insertions(+)

    diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts
    index 86dbdc10fe9c..cdec1af99be1 100644
    --- a/arch/arm/boot/dts/r8a7790-lager.dts
    +++ b/arch/arm/boot/dts/r8a7790-lager.dts
    @@ -159,6 +159,12 @@
    renesas,groups = "qspi_ctrl", "qspi_data4";
    renesas,function = "qspi";
    };
    +
    + msiof1_pins: spi2 {
    + renesas,groups = "msiof1_clk", "msiof1_sync", "msiof1_rx",
    + "msiof1_tx";
    + renesas,function = "msiof1";
    + };
    };

    &ether {
    @@ -221,6 +227,22 @@
    };
    };

    +&msiof1 {
    + pinctrl-0 = <&msiof1_pins>;
    + pinctrl-names = "default";
    +
    + status = "okay";
    +
    + pmic: pmic@0 {
    + compatible = "renesas,r2a11302ft";
    + reg = <0>;
    + spi-max-frequency = <6000000>;
    + spi-cpol;
    + spi-cpha;
    + };
    +
    +};
    +
    &sdhi0 {
    pinctrl-0 = <&sdhi0_pins>;
    pinctrl-names = "default";
    --
    1.7.9.5


    \
     
     \ /
      Last update: 2014-02-25 12:21    [W:3.163 / U:1.280 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site