lkml.org 
[lkml]   [2014]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 07/23] fnic: Use pci_enable_msix_exact() instead of pci_enable_msix()
Date
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: Hiral Patel <hiralpat@cisco.com>
Cc: Suma Ramars <sramars@cisco.com>
Cc: Brian Uchino <buchino@cisco.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
---
drivers/scsi/fnic/fnic_isr.c | 4 ++--
1 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c
index 7d9b54a..a0dd1b6 100644
--- a/drivers/scsi/fnic/fnic_isr.c
+++ b/drivers/scsi/fnic/fnic_isr.c
@@ -257,8 +257,8 @@ int fnic_set_intr_mode(struct fnic *fnic)
fnic->raw_wq_count >= m &&
fnic->wq_copy_count >= o &&
fnic->cq_count >= n + m + o) {
- if (!pci_enable_msix(fnic->pdev, fnic->msix_entry,
- n + m + o + 1)) {
+ if (!pci_enable_msix_exact(fnic->pdev, fnic->msix_entry,
+ n + m + o + 1)) {
fnic->rq_count = n;
fnic->raw_wq_count = m;
fnic->wq_copy_count = o;
--
1.7.7.6


\
 
 \ /
  Last update: 2014-02-24 09:41    [W:1.836 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site