Messages in this thread |  | | Date | Mon, 24 Feb 2014 14:23:50 -0300 | Subject | Re: [PATCH v3 0/2] regulator: core: Fix ops->enable/disable usage | From | Fabio Estevam <> |
| |
On Sun, Feb 23, 2014 at 2:12 AM, Mark Brown <broonie@kernel.org> wrote: > On Thu, Feb 20, 2014 at 05:36:02PM +0100, Markus Pargmann wrote: >> Hi, >> >> These two patches replace all ops->enable/disable by >> _regulator_do_disable/enable function calls. These wrappers also handle gpio >> regulators. > > Applied both, thanks.
With these two patches applied I get the following error on mx6qsabresd running today's linux-next:
vdd1p1: failed to enable anatop_regulator regulator-1p1.2: failed to register vdd1p1 anatop_regulator: probe of regulator-1p1.2 failed with error -22 vdd3p0: failed to enable anatop_regulator regulator-3p0.3: failed to register vdd3p0 anatop_regulator: probe of regulator-3p0.3 failed with error -22 vdd2p5: failed to enable anatop_regulator regulator-2p5.4: failed to register vdd2p5 anatop_regulator: probe of regulator-2p5.4 failed with error -22 vddarm: 725 <--> 1450 mV at 1100 mV vddpu: 725 <--> 1450 mV at 1100 mV vddsoc: 725 <--> 1450 mV at 1175 mV ....
pfuze100-regulator 1-0008: Full layer: 1, Metal layer: 0 pfuze100-regulator 1-0008: FAB: 0, FIN: 0 SW1AB: failed to enable pfuze100-regulator 1-0008: register regulatorSW1AB failed pfuze100-regulator: probe of 1-0008 failed with error -22
Reverting these two patches the regulators probe successfully.
Any ideas?
Regards,
Fabio Estevam
|  |