lkml.org 
[lkml]   [2014]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH RESEND v2 1/3] usb: chipidea: msm: Add device tree binding information
Date


>
> On Mon, 2014-02-24 at 08:15 +0000, Peter Chen wrote:
> > > +CI13xxx (Chipidea) USB controllers
> > > +
> > > +Required properties:
> > > +- compatible: should contain "qcom,ci-hdrc"
> > > +- reg: offset and length of the register set in the memory
> map
> > > +- interrupts: interrupt-specifier for the controller interrupt.
> > > +- usb-phy: phandle for the PHY device
> > > +- dr_mode: Sould be "peripheral"
> > > +
> > > + gadget@f9a55000 {
> > > + compatible = "qcom,ci-hdrc";
> > > + reg = <0xf9a55000 0x400>;
> > > + dr_mode = "peripheral";
> > > + interrupts = <0 134 0>;
> > > + usb-phy = <&usb_otg>;
> > > + };
> > > +
> >
> > usb_otg is not a good name for the node of usb phy.
>
> Well, this is just an example. Is this better <&phy0>?
>

<&usbphy0> is better since we have ethernet, sata, pcie phy.

Peter



\
 
 \ /
  Last update: 2014-02-24 12:21    [W:0.065 / U:0.280 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site