lkml.org 
[lkml]   [2014]   [Feb]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 12/23] lpfc: Use pci_enable_msix_range() instead of pci_enable_msix()
Date
As result of deprecation of MSI-X/MSI enablement functions
pci_enable_msix() and pci_enable_msi_block() all drivers
using these two interfaces need to be updated to use the
new pci_enable_msi_range() or pci_enable_msi_exact()
and pci_enable_msix_range() or pci_enable_msix_exact()
interfaces.

Signed-off-by: Alexander Gordeev <agordeev@redhat.com>
Cc: James Smart <james.smart@emulex.com>
Cc: linux-scsi@vger.kernel.org
Cc: linux-pci@vger.kernel.org
---
drivers/scsi/lpfc/lpfc_init.c | 45 ++++++++++++++++++----------------------
1 files changed, 20 insertions(+), 25 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index a9df97a..5368f75 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -8047,9 +8047,9 @@ lpfc_sli4_pci_mem_unset(struct lpfc_hba *phba)
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors to device
- * with SLI-3 interface specs. The kernel function pci_enable_msix() is
- * called to enable the MSI-X vectors. Note that pci_enable_msix(), once
- * invoked, enables either all or nothing, depending on the current
+ * with SLI-3 interface specs. The kernel function pci_enable_msix_exact()
+ * is called to enable the MSI-X vectors. Note that pci_enable_msix_exact(),
+ * once invoked, enables either all or nothing, depending on the current
* availability of PCI vector resources. The device driver is responsible
* for calling the individual request_irq() to register each MSI-X vector
* with a interrupt handler, which is done in this function. Note that
@@ -8073,8 +8073,8 @@ lpfc_sli_enable_msix(struct lpfc_hba *phba)
phba->msix_entries[i].entry = i;

/* Configure MSI-X capability structure */
- rc = pci_enable_msix(phba->pcidev, phba->msix_entries,
- ARRAY_SIZE(phba->msix_entries));
+ rc = pci_enable_msix_exact(phba->pcidev, phba->msix_entries,
+ ARRAY_SIZE(phba->msix_entries));
if (rc) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0420 PCI enable MSI-X failed (%d)\n", rc);
@@ -8187,8 +8187,8 @@ lpfc_sli_disable_msix(struct lpfc_hba *phba)
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode to device with
- * SLI-3 interface spec. The kernel function pci_enable_msi() is called to
- * enable the MSI vector. The device driver is responsible for calling the
+ * SLI-3 interface spec. The kernel function pci_enable_msi() is called
+ * to enable the MSI vector. The device driver is responsible for calling the
* request_irq() to register MSI vector with a interrupt the handler, which
* is done in this function.
*
@@ -8611,16 +8611,14 @@ out:
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors to device
- * with SLI-4 interface spec. The kernel function pci_enable_msix() is called
- * to enable the MSI-X vectors. Note that pci_enable_msix(), once invoked,
- * enables either all or nothing, depending on the current availability of
- * PCI vector resources. The device driver is responsible for calling the
- * individual request_irq() to register each MSI-X vector with a interrupt
- * handler, which is done in this function. Note that later when device is
- * unloading, the driver should always call free_irq() on all MSI-X vectors
- * it has done request_irq() on before calling pci_disable_msix(). Failure
- * to do so results in a BUG_ON() and a device will be left with MSI-X
- * enabled and leaks its vectors.
+ * with SLI-4 interface spec. The kernel function pci_enable_msix_range()
+ * is called to enable the MSI-X vectors. The device driver is responsible
+ * for calling the individual request_irq() to register each MSI-X vector
+ * with a interrupt handler, which is done in this function. Note that
+ * later when device is unloading, the driver should always call free_irq()
+ * on all MSI-X vectors it has done request_irq() on before calling
+ * pci_disable_msix(). Failure to do so results in a BUG_ON() and a device
+ * will be left with MSI-X enabled and leaks its vectors.
*
* Return codes
* 0 - successful
@@ -8636,17 +8634,14 @@ lpfc_sli4_enable_msix(struct lpfc_hba *phba)
phba->sli4_hba.msix_entries[index].entry = index;

/* Configure MSI-X capability structure */
- vectors = phba->cfg_fcp_io_channel;
-enable_msix_vectors:
- rc = pci_enable_msix(phba->pcidev, phba->sli4_hba.msix_entries,
- vectors);
- if (rc > 1) {
- vectors = rc;
- goto enable_msix_vectors;
- } else if (rc) {
+ rc = pci_enable_msix_range(phba->pcidev, phba->sli4_hba.msix_entries,
+ 2, phba->cfg_fcp_io_channel);
+ if (rc < 0) {
lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
"0484 PCI enable MSI-X failed (%d)\n", rc);
goto vec_fail_out;
+ } else {
+ vectors = rc;
}

/* Log MSI-X vector assignment */
--
1.7.7.6


\
 
 \ /
  Last update: 2014-02-24 10:41    [W:0.202 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site