lkml.org 
[lkml]   [2014]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 4/4] spi: rspi: Fix loopback mode for Dual/Quad SPI Transfers
Date
From: Geert Uytterhoeven <geert+renesas@linux-m68k.org>

While normal Dual and Quad SPI Transfers are unidirectional, we must do
a bidirectional transfer if loopback mode is enabled, else rx_buf is not
filled.

With spidev it seemed to work, as spidev uses the same buffer for
tranmission and reception.

Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
---
drivers/spi/spi-rspi.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/spi/spi-rspi.c b/drivers/spi/spi-rspi.c
index 4a1f978c3381..92bec7e91046 100644
--- a/drivers/spi/spi-rspi.c
+++ b/drivers/spi/spi-rspi.c
@@ -859,7 +859,9 @@ static int qspi_transfer_one(struct spi_master *master, struct spi_device *spi,
{
struct rspi_data *rspi = spi_master_get_devdata(master);

- if (xfer->tx_buf && xfer->tx_nbits > SPI_NBITS_SINGLE) {
+ if (spi->mode & SPI_LOOP) {
+ return qspi_transfer_out_in(rspi, xfer);
+ } else if (xfer->tx_buf && xfer->tx_nbits > SPI_NBITS_SINGLE) {
/* Quad or Dual SPI Write */
return qspi_transfer_out(rspi, xfer);
} else if (xfer->rx_buf && xfer->rx_nbits > SPI_NBITS_SINGLE) {
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-21 19:01    [W:0.041 / U:0.728 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site