lkml.org 
[lkml]   [2014]   [Feb]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller
On Fri, Feb 21, 2014 at 12:38:10AM +0000, Bjorn Andersson wrote:
> This bus driver supports the QUP i2c hardware controller in the Qualcomm SOCs.
> The Qualcomm Universal Peripheral Engine (QUP) is a general purpose data path
> engine with input/output FIFOs and an embedded i2c mini-core. The driver
> supports FIFO mode (for low bandwidth applications) and block mode (interrupt
> generated for each block-size data transfer).
>
> Cc: Andy Gross <agross@codeaurora.org>
> Cc: Stephen Boyd <sboyd@codeaurora.org>
> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---
> drivers/i2c/busses/Kconfig | 10 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-qup.c | 772 ++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 783 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-qup.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index f5ed031..403e196 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -648,6 +648,16 @@ config I2C_PXA_SLAVE
> is necessary for systems where the PXA may be a target on the
> I2C bus.

[...]

> +static const struct of_device_id qup_i2c_dt_match[] = {
> + { .compatible = "qcom,i2c-qup-v1.1.1" },
> + { .compatible = "qcom,i2c-qup-v2.1.1" },
> + { .compatible = "qcom,i2c-qup-v2.2.1" },

The all seem to be handled the same.

Are they all compatible with the "qcom,i2c-qup-v1.1.1" programming
model, such that it could be used as a fallback in the compatible list
(and the driver would only need to look for it for now)?

Cheers,
Mark.

\
 
 \ /
  Last update: 2014-02-21 12:41    [W:0.718 / U:0.704 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site