lkml.org 
[lkml]   [2014]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 1/2] genirq: Fix the possible synchronize_irq() wait-forever
Date
Hello Thomas,

> -----Original Message-----
> From: Thomas Gleixner [mailto:tglx@linutronix.de]
> Sent: Thursday, February 20, 2014 8:53 PM
> To: Liu, Chuansheng
> Cc: linux-kernel@vger.kernel.org; Wang, Xiaoming
> Subject: RE: [PATCH 1/2] genirq: Fix the possible synchronize_irq() wait-forever
>
> On Thu, 20 Feb 2014, Liu, Chuansheng wrote:
> > Hello Thomas,
> >
> > > -----Original Message-----
> > > From: Thomas Gleixner [mailto:tglx@linutronix.de]
> > > Sent: Monday, February 10, 2014 4:58 PM
> > > To: Liu, Chuansheng
> > > Cc: linux-kernel@vger.kernel.org; Wang, Xiaoming
> > > Subject: Re: [PATCH 1/2] genirq: Fix the possible synchronize_irq()
> wait-forever
> > >
> > > On Mon, 10 Feb 2014, Chuansheng Liu wrote:
> > > > There is below race between irq handler and irq thread:
> > > > irq handler irq thread
> > > >
> > > > irq_wake_thread() irq_thread()
> > > > set bit RUNTHREAD
> > > > ... clear bit RUNTHREAD
> > > > thread_fn()
> > > > [A]test_and_decrease
> > > > thread_active
> > > > [B]increase thread_active
> > > >
> > > > If action A is before action B, after that the thread_active
> > > > will be always > 0, and for synchronize_irq() calling, which
> > > > will be waiting there forever.
> > >
> > > No. thread_active is 0, simply because after the atomic_dec_and_test()
> > > it is -1 and the atomic_inc on the other side will bring it back to 0.
> > >
> > Yes, you are right. The thread_active is back to 0 at last.
> >
> > The case we meet is:
> > 1/ T1: blocking at disable_irq() -- > sync_irq() -- > wait_event()
> > [ 142.678681] [<c1a5b353>] schedule+0x23/0x60
> > [ 142.683466] [<c12b24c5>] synchronize_irq+0x75/0xb0
> > [ 142.688931] [<c125fad0>] ? wake_up_bit+0x30/0x30
> > [ 142.694201] [<c12b33ab>] disable_irq+0x1b/0x20
> > [ 142.699278] [<c17a79bc>] smb347_shutdown+0x2c/0x50
> > [ 142.704744] [<c1789f7d>] i2c_device_shutdown+0x2d/0x40
> > [ 142.710597] [<c1601734>] device_shutdown+0x14/0x140
> > [ 142.716161] [<c12535f2>] kernel_restart_prepare+0x32/0x40
> > [ 142.722307] [<c1253613>] kernel_restart+0x13/0x60
> >
> > 2/ The corresponding irq thread is at sleep state:
> > [ 587.552408] irq/388-SMB0349 S f1c47620 7276 119 2
> 0x00000000
> > [ 587.552439] f1d6bf20 00000046 f1c47a48 f1c47620 f1d6bec4 9e91731c
> 00000001 c1a5f3a5
> > [ 587.552468] c20469c0 00000001 c20469c0 f36559c0 f1c47620 f307bde0
> c20469c0 f1d6bef0
> > [ 587.552497] 00000296 00000000 00000296 f1d6bef0 c1a5bfa6
> f1c47620 f1d6bf14 c126e329
> > [ 587.552501] Call Trace:
> > [ 587.552519] [<c1a5f3a5>] ? sub_preempt_count+0x55/0xe0
> > [ 587.552535] [<c1a5bfa6>] ? _raw_spin_unlock_irqrestore+0x26/0x50
> > [ 587.552548] [<c126e329>] ? set_cpus_allowed_ptr+0x59/0xe0
> > [ 587.552563] [<c1a5b093>] schedule+0x23/0x60
> > [ 587.552576] [<c12b2ae1>] irq_thread+0xa1/0x130
> > [ 587.552588] [<c12b27f0>] ? irq_thread_dtor+0xa0/0xa0
> >
> > 3/ All the cpus are in the idle task;
>
> Lets look at it again:
>
> CPU 0 CPU1
>
> irq handler irq thread
> set IRQS_INPROGRESS
> ...
> irq_wake_thread() irq_thread()
> set bit RUNTHREAD
> ... clear bit RUNTHREAD
> thread_fn()
> atomic_dec_and_test(threads_active) ( 0 -> -1)
>
> atomic_inc(threads_active) ( -1 -> 0)
> clr IRQS_INPROGRESS
>
> Now synchronize_irq comes into play, that's what caused you to look
> into this.
>
> synchronize_irq() can never observe the -1 state because it is
> serialized against IRQS_INPROGESS. And when IRQS_INPROGRESS is
> cleared, the threads_active state is back to 0.
>
> I'm really not seing how this can happen. Any chance you can reproduce
> this by executing the situation which led to this in a loop?
We can have a try to forcedly reproduce the case of threads_active -1/0.

But feels there is another case which the synchronize_irq waited there forever,
it is no waking up action from irq_thread().

CPU0 CPU1
disable_irq() irq_thread()
synchronize_irq()
wait_event()
adding the __wait into the queue wake_threads_waitq
test threads_active==0
atomic_dec_and_test(threads_active) 1 -- > 0
waitqueue_active(&desc->wait_for_threads)
<== Here without smp_mb(), CPU1 maybe detect
the queue is still empty??
schedule()

It will cause although the threads_active is 0, but irq_thread() didn't do the waking up action.
Is it reasonable? Then maybe we can add one smp_mb() before waitqueue_active.

Thanks.










\
 
 \ /
  Last update: 2014-02-21 03:02    [W:0.104 / U:0.304 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site