lkml.org 
[lkml]   [2014]   [Feb]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v3 2/2] i2c: New bus driver for the Qualcomm QUP I2C controller
From
Date
On Thu, 2014-02-20 at 16:38 -0800, Bjorn Andersson wrote:
> This bus driver supports the QUP i2c hardware controller in the Qualcomm SOCs.
> The Qualcomm Universal Peripheral Engine (QUP) is a general purpose data path
> engine with input/output FIFOs and an embedded i2c mini-core. The driver
> supports FIFO mode (for low bandwidth applications) and block mode (interrupt
> generated for each block-size data transfer).

trivia:

> diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c
[]
> +#ifdef CONFIG_PM_SLEEP
> +static int qup_i2c_suspend(struct device *device)
> +{
> + dev_dbg(device, "system suspend");
> + qup_i2c_pm_suspend_runtime(device);
> + return 0;
> +}
> +
> +static int qup_i2c_resume(struct device *device)
> +{
> + dev_dbg(device, "system resume");
> + qup_i2c_pm_resume_runtime(device);
> + pm_runtime_mark_last_busy(device);
> + pm_request_autosuspend(device);
> + return 0;
> +}
> +#endif

Missing terminating newlines for dev_dbg statements.




\
 
 \ /
  Last update: 2014-02-21 02:41    [W:0.153 / U:0.192 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site