lkml.org 
[lkml]   [2014]   [Feb]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH 2/2] ASoC: fsl: Make Freescale SAI/ESAI/SPDIF to be visible in Kconfig
Date
Hi Mark,

I'm not very sure of this patch, maybe should we add one menu
in Kconfig for all visible CPU DAIs firstly like for code drivers?

Thanks,

--
Best Regards,
Xiubo


> Subject: [PATCH 2/2] ASoC: fsl: Make Freescale SAI/ESAI/SPDIF to be visible in
> Kconfig
>
> For simple card since the whole idea is to support any CODEC and
> any CPU DAI with the same driver, we should probably just make sure
> that all the individual CODEC and CPU DAI drivers can be enabled in
> Kconfig. That way we don't have to have specific Kconfig entries for
> boards and loose some of the benefit of the generic card.
>
> This will make the Freescale SAI/ESAI/SPDIF device be visible in
> Kconfig.
>
> Signed-off-by: Xiubo Li <Li.Xiubo@freescale.com>
> Cc: Nicolin Chen <Guangyu.Chen@freescale.com>
> Cc: Mark Brown <broonie@linaro.org>
> ---
> sound/soc/fsl/Kconfig | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/sound/soc/fsl/Kconfig b/sound/soc/fsl/Kconfig
> index d0914c0..f397144 100644
> --- a/sound/soc/fsl/Kconfig
> +++ b/sound/soc/fsl/Kconfig
> @@ -1,5 +1,5 @@
> config SND_SOC_FSL_SAI
> - tristate
> + tristate "ALSA SoC support for the Freescale SAI device"
> select REGMAP_MMIO
> select SND_SOC_GENERIC_DMAENGINE_PCM
>
> @@ -7,11 +7,11 @@ config SND_SOC_FSL_SSI
> tristate
>
> config SND_SOC_FSL_SPDIF
> - tristate
> + tristate "ALSA SoC support for the Freescale SPDIF device"
> select REGMAP_MMIO
>
> config SND_SOC_FSL_ESAI
> - tristate
> + tristate "ALSA SoC support for the Freescale ESAI device"
> select REGMAP_MMIO
>
> config SND_SOC_FSL_UTILS
> --
> 1.8.4
>



\
 
 \ /
  Last update: 2014-02-20 03:41    [W:0.070 / U:0.856 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site