lkml.org 
[lkml]   [2014]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/2] USB: at91: using USBA_NR_DMAS for DMA channels
Date
The SoCs earlier than sama5d3, they have the same number endpoints
and DMA channels. In driver code, they use the same definition
USBA_NR_ENDPOINTS for both endpoints and dma channels. However,
in sama5d3, it has different number for endpoints and DMA channels.
So, define a new micro USBA_NR_DMAs for DMA channels. And the
USBA_NR_ENDPOINS is not used anymore, remove it at the same time.

Signed-off-by: Bo Shen <voice.shen@atmel.com>
---
Changes in v2:
- Make the commit message more clearer.

drivers/usb/gadget/atmel_usba_udc.c | 2 +-
drivers/usb/gadget/atmel_usba_udc.h | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c
index 7e67a81..5cded1c 100644
--- a/drivers/usb/gadget/atmel_usba_udc.c
+++ b/drivers/usb/gadget/atmel_usba_udc.c
@@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid)
if (dma_status) {
int i;

- for (i = 1; i < USBA_NR_ENDPOINTS; i++)
+ for (i = 1; i < USBA_NR_DMAS; i++)
if (dma_status & (1 << i))
usba_dma_irq(udc, &udc->usba_ep[i]);
}
diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h
index 2922db5..a70706e 100644
--- a/drivers/usb/gadget/atmel_usba_udc.h
+++ b/drivers/usb/gadget/atmel_usba_udc.h
@@ -210,7 +210,7 @@
#define USBA_FIFO_BASE(x) ((x) << 16)

/* Synth parameters */
-#define USBA_NR_ENDPOINTS 7
+#define USBA_NR_DMAS 7

#define EP0_FIFO_SIZE 64
#define EP0_EPT_SIZE USBA_EPT_SIZE_64
--
1.8.5.2


\
 
 \ /
  Last update: 2014-02-19 04:01    [W:0.469 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site