lkml.org 
[lkml]   [2014]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
SubjectRe: [PATCH] of_mdio: fix phy interrupt passing
Date
On Mon, 17 Feb 2014 16:29:40 +0000, Ben Dooks <ben.dooks@codethink.co.uk> wrote:
> The of_mdiobus_register_phy() is not setting phy->irq this causing
> some drivers to incorrectly assume that the PHY does not have an
> IRQ associated with it or install an interrupt handler for the
> PHY.
>
> Simplify the code setting irq and set the phy->irq at the same
> time so that the case if mdio->irq is not NULL is easier to read.
>
> This fixes the issue:
> net eth0: attached PHY 1 (IRQ -1) to driver Micrel KSZ8041RNLI
>
> to the correct:
> net eth0: attached PHY 1 (IRQ 416) to driver Micrel KSZ8041RNLI
>
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> ---
> drivers/of/of_mdio.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> index 875b7b6..7b3e7b0 100644
> --- a/drivers/of/of_mdio.c
> +++ b/drivers/of/of_mdio.c
> @@ -44,7 +44,7 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *chi
> {
> struct phy_device *phy;
> bool is_c45;
> - int rc, prev_irq;
> + int rc;
> u32 max_speed = 0;
>
> is_c45 = of_device_is_compatible(child,
> @@ -55,11 +55,11 @@ static int of_mdiobus_register_phy(struct mii_bus *mdio, struct device_node *chi
> return 1;
>
> if (mdio->irq) {
> - prev_irq = mdio->irq[addr];
> - mdio->irq[addr] =
> - irq_of_parse_and_map(child, 0);
> - if (!mdio->irq[addr])
> - mdio->irq[addr] = prev_irq;

I cannot for the life for me remeber why the code was structured that
way. Your change is better.

> + rc = irq_of_parse_and_map(child, 0);
> + if (rc > 0) {
> + mdio->irq[addr] = rc;
> + phy->irq = rc;
> + }
> }

The outer if is merely protecting against no irq array being allocated
for the bus. Would not the following be better:

rc = irq_of_parse_and_map(child, 0);
if (rc > 0) {
phy->irq = rc;
if (mdio->irq)
mdio->irq[addr] = rc;
}

g.


\
 
 \ /
  Last update: 2014-02-18 11:21    [W:0.105 / U:0.096 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site