lkml.org 
[lkml]   [2014]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH v2 2/3] usb: chipidea: msm: Add device tree support
Hello.

On 02/19/2014 12:34 AM, Courtney Cavin wrote:

>>>>> From: "Ivan T. Ivanov" <iivanov@mm-sol.com>

>>>>> Allows controller to be specified via device tree.
>>>>> Pass PHY phandle specified in DT to core driver.

>>>>> Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
>>>>> ---
>>>>> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
>>>>> 1 file changed, 22 insertions(+), 1 deletion(-)

>>>> You also need to describe the binding you're creating in
>>>> Documentation/devicetree/bindings/usb/<file>.txt.

>>> Did you check "[PATCH v2 1/3]"?

>> Did you send it to 'linux-usb'? I just didn't get the patch.
>> (Typically, the bindings are described in the same patch the DT support is
>> added to the driver bu YMMV, of course.)

> Although I would personally agree that this is the most logical method,
> it would appear that the DT guys disagree with us [1]. Lately, they

Thank you for the reference.

> seem to have either given up or are otherwise preoccupied, so perhaps
> you can still slip a few patches by them. ;)

Yeah, I was at last able to get my Ethernet driver bindings applied. :-)

> -Courtney

> [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/submitting-patches.txt

WBR, Sergei



\
 
 \ /
  Last update: 2014-02-19 00:21    [W:0.106 / U:1.588 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site