lkml.org 
[lkml]   [2014]   [Feb]   [18]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH 6/6] devicetree: bindings: voltagedomain: add bindings for OMAP compatible SoCs
Date
Add documentation for device tree description for basic voltage domain
for Texas Instruments OMAP compatible SoC family of processors which
controls both bias and supply voltage planes.

Signed-off-by: Nishanth Menon <nm@ti.com>
---
.../bindings/power/voltdm/voltdm_omap.txt | 24 ++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 Documentation/devicetree/bindings/power/voltdm/voltdm_omap.txt

diff --git a/Documentation/devicetree/bindings/power/voltdm/voltdm_omap.txt b/Documentation/devicetree/bindings/power/voltdm/voltdm_omap.txt
new file mode 100644
index 0000000..30cd3d2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/voltdm/voltdm_omap.txt
@@ -0,0 +1,24 @@
+Texas Instruments OMAP compatible voltage domain description
+
+This binding uses [1] and describes the voltage domain devices
+typically used on Texas Instruments OMAP compatible SoC family of
+processors.
+
+[1] Documentation/devicetree/bindings/power/voltdm/voltage_domain.txt
+
+Required Properties:
+- compatible: Should be one of:
+ "ti,omap-voltdm" - basic voltage domain controlling VDD and VBB
+- vdd-supply: phandle to regulator controlling VDD supply
+- vbb-supply: phandle to regulator controlling Body Bias supply
+ (Usually Adaptive Body Bias regulator)
+- #voltdm-cells: shall be <0>
+
+Example:
+voltage_domain_mpu: voltdm@1 {
+ compatible = "ti,omap-voltdm";
+ #voltdm-cells = <0>;
+
+ vdd-supply = <&vcc>;
+ vbb-supply = <&abb_mpu>;
+};
--
1.7.9.5


\
 
 \ /
  Last update: 2014-02-18 23:41    [W:0.123 / U:0.524 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site